Bedienungsanleitung Alpine CDE-W235BT (Seite 27 von 44) (Englisch)

471372

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

27-EN

You can set whether this unit can be recognised or not from a

BLUETOOTH compatible device. Normally set this to VISI M ON.

 Setting item: VISIBLE M

Setting contents:

VISI M ON (Initial setting) / VISI M OFF

VISI M ON:

Enable recognition of this unit from the BLUETOOTH compatible

device.

VISI M OFF:

Disable recognition of this unit from the BLUETOOTH compatible

device.

The BLUETOOTH device is used when a connectable BLUETOOTH

compatible device is searched and connected to this unit, or when a new

BLUETOOTH compatible device is registered.

 Setting item: SEARCH DEV

When SEARCH DEV is selected, and “SEARCHING” is

displayed, the search gets started.

Note

• The “SEARCHING” operation can be stopped by pressing .

Turn the Rotary encoder to select the name of the device

to be connected from the Device Search list and then

press ENTER.

If this unit is successfully connected to a BLUETOOTH

compatible device, “CONNECTED” is displayed, and then

the unit returns to normal mode.

Depending on the mobile phone, it may be necessary to input a

passcode. In this case, “CODE 0000” is displayed. Input the

passcode “0000” in the BLUETOOTH compatible device to make

the pairing. After the pairing is completed, the unit will

automatically connect to the BLUETOOTH compatible device. If

you input the wrong passcode or the communication fails,

“FAILED” is displayed.

You can flexibly customize the sound of call to fit your own preferences.

 Setting item: CALL SOUND

 Further setting items: VOL LV ADJ / AUTO SET

Adjusting the volume (VOL LV ADJ)

You can emphasize or weaken the volume level of the Phone call, the

ring tone and the microphone input to fit your own preferences.

Setting contents:

PHONE TALK:

-5 ~ +5 db

RING TONE:

-5 ~ +5 db

MIC GAIN:

-5 ~ +5 db

Note

• These setting items are the same as PHONE TALK, RING TONE and

MIC GAIN settings in AUDIO step mode, refer to “Setting the Source

Volume Level” on page 19.

Sound Auto setting (AUTO SET)

This unit provides 5 methods to improve the sound quality of calling.

You can choose the type according to your own preference.

Setting contents:

TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5

TYPE1:

Standard Mode (recommended)

TYPE2:

Enhances the noise reduction

TYPE3:

Enhances the echo-cancel

TYPE4:

Enhances both noise reduction and echo-cancel

TYPE5:

Weakens both noise reduction and echo-cancel

Notes

• The functions below are designed to improve the sound quality of the

caller to driver.

Noise reduction: This function can reduce the road noise, but excessive

enhancement may affect the sound quality of calling.

Echo-cancel: This function can reduce the echo noise, but excessive

enhancement may affect the sound quality of calling.

• Improvement effect differs depending on the actual calling environment,

so please choose a suitable type accordingly.

You can choose whether to use these functions according to the

following setting.

 Setting item: SENDER ID

 Further setting items: MSG ALERT / CALLER ID

Setting contents:

ON (Initial setting) / OFF

Setting text message indicator ON/OFF

(MSG ALERT)

When it is set to ON, the h indicator blinks for 30 seconds while

receiving a text message. The h indicator remains on if there is an

unread text message on the connected mobile phone.

Notes

• Depending on the mobile phone, this function may not be performed.

• The text of the text message will not be displayed on this unit.

• When this unit prompts you of a received text message, it is

recommended to read the message after stopping your car in a safe

place, rather than read it immediately through your phone.

Setting the caller information display ON/OFF

(CALLER ID)

If you want to keep the ID information of the caller from others, set this

item to OFF. While you are dialing a number, telephone name will be

displayed as “ID UNSENT”. While a call is dialing in or during a call,

“NO NAME” will be displayed.

Setting the Visible Mode

Pairing a BLUETOOTH Device from the

unit

Setting the BLUETOOTH sound quality

Setting the caller information display/

text message indicator ON/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-W235BT Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-W235BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info