Bedienungsanleitung Alpine CVA-1003R (Seite 46 von 58) (Englisch)

471347

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

44-EN

Information

In Case of Difficulty

If you encounter a problem, please review the items

in the following checklist. This guide will help you

isolate the problem if the unit is at fault. Otherwise,

make sure the rest of your system is properly

connected or consult your authorized Alpine dealer.

Basic

No function or display.

• Vehicle's ignition is off.

- If connected following instructions, the unit will not

operate with the vehicle's ignition off.

• Improper power lead connections.

- Check power lead connections.

• Blown fuse.

- Check the fuse on the battery lead of the unit; replace

with the proper value if necessary.

• Internal micro-computer malfunctioned due to

interference noise etc.

- Press the Reset switch with a ballpoint pen or other

pointed article.

• Weak or no battery power.

- Check battery.

No sound or unnatural sound.

• Incorrect setting of volume/balance/fader controls.

- Readjust the controls.

• Connections are not properly or securely made.

- Check the connections and firmly connect.

Screen not displayed.

• Brightness control is set at the minimum position.

- Adjust the Brightness control.

• Temperature in the vehicle is too low.

- Increase the vehicle's interior temperature to operation

temperature range.

• Connections to the DVD/CD player, navigation system

are not securely made.

- Check the connections and firmly connect.

Movement of displayed picture is abnormal.

• Temperature in the vehicle is too high.

- Allow the vehicle's interior temperature to cool.

Unclear or noisy display.

• Fluorescent plate is worn out.

- Replace the fluorescent plate.

Navigation system inoperative.

• Connections with the navigation system are improper.

- Check the connections with the navigation system and

connect the cables correctly and firmly.

Unclear picture display.

• Fluorescent tube is exhausted.

- Replace the fluorescent tube∗.

∗ The fluorescent tube replacement is not free of charge

even within the warranty period, for the tube is an

article of consumption.

Radio

Unable to receive stations.

• No antenna or open connection in cable.

- Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

• You are in a weak signal area.

- Make sure the tuner is in the DX mode.

• If the area you are in is a primary signal area, the

antenna may not be grounded and connected properly.

- Check your antenna connections; make sure the

antenna is properly grounded at its mounting location.

• The antenna may not be the proper length.

- Make sure the antenna is fully extended; if broken,

replace the antenna with a new one.

Broadcast is noisy.

• The antenna is not the proper length.

- Extend the antenna fully; replace it if it is broken.

• The antenna is poorly grounded.

- Make sure the antenna is grounded properly at its

mounting location.

• The station signal is weak and noisy.

- If above solution does not work, tune in another

station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CVA-1003R Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info