Bedienungsanleitung Alpine HCE-C500 (Seite 11 von 24) (Englisch)

471437

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ALPINE HCE-C500 EN 68-18693Z84-A (A5)

9-EN

ach

View

cle.

view

hen

Indication mark meaning

C Guidelines representing a distance of

approx. 0.5 m all round the vehicle.

Rear View: Refer to “Rear View” (page 9).

Top View synthesises images from four cameras

and displays the combined view on the monitor.

As the sensitivity of each camera is individually

adjusted to the optimal degree, the image on

the monitor may appear rather unnatural

(brightness, tint, etc.).

With Top View, the camera image around the joins

or borders may not be displayed. For details, refer to

“About Top View Blind Spots” (page 13).

Do not use Top View while retracting the door

mirrors or when the vehicle doors are not completely

closed, as the image will not be displayed properly.

For details of how to switch image patterns, refer to

“Camera Operation” (page 14).

The rear camera image is a mirror image. The image

in the display is reversed, as you would see through

the rearview mirror. As the camera uses a wide-angle

lens, there is a difference between the actual distance

and what appears on the screen.

Images may not be clearly displayed in the following

conditions. This is normal.

In the dark (nighttime, etc.)

The temperature near the lens is high or low.

The camera has water droplets on it or the

humidity is high (rainy day, etc.).

Foreign substances (dirt, etc.) are on or around the

camera.

Sun light or the light of a headlamp directly enters

the camera lens.

The image range will be affected by the height or

inclination of the vehicle. The position indicated

by the distance guidelines, actual distance from

the road surface and distances from objects will

vary, depending on factors such as number of

passengers, load weight and suspension adjustments.

In addition, joins in Top View images may not be

properly aligned. Always visually check the actual

conditions around the vehicle to ensure safety.

•

–

•

Rear View

Displays the area behind the vehicle.

Use this when reversing into a garage or when

checking for objects behind the vehicle.

Indication mark meaning

E Car width extension marks (orange,

yellow and green in order of distance)

If properly calibrated, the marks indicate the

car’s width. This helps guide the car’s path

when backing up in a straight line.

F Distance guidelines

The horizontal lines represent the distance

from the rear of the car (from the rear end of

the bumper).

The lines do not move in synchronisation

with the steering wheel.

Each line represents a distance of 0.5 m

(orange), 1 m (yellow) and 2 m (green)

behind the vehicle.

Depending on the condition of the car or road

surface, the range of vision may vary.

The camera has a limited range of vision. Objects at

extreme angles to the camera (e.g. under the bumper

or at opposite ends of the bumper) may not be in the

its field-of-vision.

The rear camera image may have a tint which is

different from the actual surroundings.

Depending on the car, the guidance may deviate to

the right or left. This is not a malfunction.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine HCE-C500 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info