Bedienungsanleitung Alpine INE-W987D (Seite 36 von 121) (Englisch)

572055

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

36-EN

Display example for DAB main screen

Band display

Displays the DAB text

Preset button

SEEK mode

• Confirm the type of DAB antenna (sold separately) before using the

DAB/DAB+/DMB function. If an active antenna that needs power

supply from this unit is used, set DAB Antenna Power to On; if a

passive antenna that does not need power supply from this unit is

used, make sure to set DAB Antenna Power to Off, otherwise, a

malfunction may occur. Refer to “Setting the DAB Antenna ON/

OFF” (page 63).

• When FM Linking is set to On, if the digital signal is weak, this unit

will switch to receive the analog FM radio signal automatically and

the source icon for Radio displays as FM Linking. For details, refer

to “Setting the FM Linking ON/OFF (Service Following)” (page 63).

• This product does only support the “Receiver Profile 1 - Standard

Audio Receiver” according to the official classification of

WorldDMB Forum.

Listening to DAB/DAB+/DMB

Press the button.

Touch [DAB] of Top banner.

The DAB mode is activated and the display changes to the

DAB mode screen.

• The display content varies depending on the last band selected.

([DAB1], etc.)

Touch [Band] of Bottom banner to select the

desired radio band.

Each touch changes the bands as follows:

Touch [TUNE] to select the tuning mode.

• There are four modes you can select for auto tuning, Service

and Ensemble:

- Service (Service Up/Down) mode:

Service of the currently received ensemble will be tuned in.

- Ensemble Seek mode:

Receivable ensembles will be tuned in automatically.

- Ensemble Manual mode:

Each ensemble is tuned in one step at a time manually.

- PTY Seek mode:

Service of the selected PTY will be tuned in.

Touch [] / [], [] / [] or [] / [] to change the

Service or Ensemble up or down respectively.

Touch and hold to change the Service or Ensemble

continuously.

Presetting Service

Select the band and ensemble, and then tune in a

desired service you wish to store in the preset

memory.

Touch and hold any one of the preset buttons for at

least 2 seconds.

The selected station is stored.

The display shows the service label or channel number

memorized.

Repeat the procedure to store up to 5 other stations

onto the same band.

To use this procedure for other bands, simply select the

desired band and repeat the procedure.

• A total of 18 services can be stored in the preset memory (6 services

for each band; DAB1, DAB2 and DAB3).

• If you store a service in a preset memory which already has a service,

the current service will be cleared and replaced with the new service.

Tuning to Preset Service

You can tune in the preset stations in memory on either band using its

preset number.

Touch [Band] of Bottom banner repeatedly until the

desired band is displayed.

Touch any one of the preset buttons that has a

service stored to it.

The preset service is received.

DAB/DAB+/DMB

DAB1 DAB2 DAB3 DAB1

Touch [ ], [ ]

Service Ensemble Seek Ensemble Manual PTY Seek

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine INE-W987D Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine INE-W987D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info