Bedienungsanleitung Alpine INE-W987D (Seite 51 von 121) (Englisch)

572055

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

51-EN

This function automatically adjusts the areas on the screen that are too

bright or too dark and corrects them to natural brightness.

Setting item: Live Contrast

Setting contents: OFF (Initial setting) / LOW / HIGH

You can select a mode suitable for the subject image.

Setting item: Visual EQ

Setting contents: OFF (Initial setting) / NIGHT M. / SOFT /

SHARP / CONTRAST

• To return to the default video settings, set this function to OFF. Any

Visual EQ selection or changes made are reset their initial settings.

Setting item: Bright

Setting content: -14 to +14 (Initial setting: 0)

You can adjust the brightness between MIN (-14) and MAX

(+14). When it reaches the minimum or maximum point, the

display shows “MIN” or “MAX” respectively.

Setting item: Colour

Setting content: -14 to +14 (Initial setting: 0)

You can adjust the colour between MIN (-14) and MAX (+14).

When it reaches the minimum or maximum point, the display

shows “MIN” or “MAX” respectively.

Setting item: Tint

Setting content: R15 to G15 (Initial setting: 0)

Adjust the colour from R15 to G15.

Setting item: Contrast

Setting content: -14 to +14 (Initial setting: 0)

You can adjust the contrast between LOW (-14) and HIGH (+14).

When it reaches the minimum or maximum point, the display

shows “LOW” or “HIGH” respectively.

Setting item: Sharp

Setting content: -5 to +5 (Initial setting: 0)

Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”

appear as the minimum and maximum values specified.

When adjusting audio (video media), you can store the settings made

for “Adjusting Live Contrast, Brightness, Colour, Tint, Contrast and

Sharp”.

Setting item: Preset1 / Preset2

1 After completing “Adjusting Live Contrast, Brightness,

Colour, Tint, Contrast and Sharp” (page 51), touch and

hold [Preset1] or [Preset2] to save the settings.

2 Touch [Preset1] or [Preset2] to call the saved settings.

• Display Mode cannot be registered.

About X800D-U/INE-W987D

Touch [About] on the General setup menu in step 3. Refer to “General

Setup Operation” (page 47).

You can view the version information of this product. Make note of this

information and refer to it whenever you contact Alpine Tech Support or

an Alpine-authorised dealer.

Setting item: Version Info

Contents: Serial No. / Firmware Version

Adjusting the Live Contrast

Selecting the Visual EQ Mode

(Factory’s setting)

OFF: Initial Setting

NIGHT M.: Suitable for movies in which dark scenes

frequently appear.

SOFT: Suitable for CGs and animated films.

SHARP: Suitable for old movies where images are not

clearly shown.

CONTRAST: Suitable for recent movies.

Adjusting Brightness

Adjusting Colour of Picture

Adjusting Tint of Picture

Adjusting Image Contrast

Adjusting Picture Quality

Saving and calling the adjusted picture

quality

Displaying the Product Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine INE-W987D Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine INE-W987D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info