Bedienungsanleitung Alpine IVA-W205R (Seite 46 von 80) (Englisch)

471354

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

45-EN

01GB06IVAW205R.fm

ALPINE IVA-W205R 68-08564Z42-A (EN)

Adjust the G-EQ to your preference.

Adjusting the Level

Touch [] or [] of the desired frequency to adjust the level.

Touch [RETURN] to return to the previous screen.

• When the speaker is set to the “OFF” mode, the graphic equalizer

for that speaker cannot be set. Refer to “Setting the Speakers”

(page 42).

• Check the playable frequency ranges of the connected speakers

before making the equalizer adjustments. If the speaker’s playable

frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz

or 20 Hz band has no effect. Additionally, you may overload and

damage the speakers.

• When graphic EQ is adjusted, the adjustment for parametric EQ

becomes ineffective.

Parametric Equalizer Adjustments

The frequency bands of the graphic equalizer are fixed. This makes it

very difficult to correct for undesired peaks and dips at specific

frequencies. The parametric equalizer’s centre frequency can be tuned

to these specific frequencies. Then, the bandwidth (Q) and level are

fine-tuned, independently, to make the necessary corrections. The

parametric equalizer function is an advanced tool for serious

audiophiles.

Check that Defeat mode is off.

Touch [SETUP] on the main source screen.

The SETUP selection screen appears.

Touch [AUDIO].

The AUDIO SETUP screen will appear.

Touch [] of A.PROC.

The A.PROCESSOR list screen appears.

Select L/R or L+R by touching [] or [] of P-EQ.

When graphic EQ is adjusted, this setting will be turned off.

Touch [] of P-EQ.

The P-EQ list screen appears.

Touch [] of the desired speaker (channel).

The P-EQ adjustment screen appears.

Adjust the P-EQ to your preference.

Selecting the Band

Touch [] or [] of BAND to select the desired band.

Adjusting the Frequency

Touch [] or [] of FREQ. to adjust the frequency of the

selected band.

Adjusting the Level

Touch [] or [] of LEVEL to adjust the level of the selected

band.

Setting the Bandwidth

Touch [] or [] of Q. to select the bandwith.

Touch [RETURN] to return to the previous screen.

• When the speaker is set to the “OFF” mode, the parametric

equalizer for that speaker cannot be set. Refer to “Setting the

Speakers” (page 42).

• It is not possible to adjust the frequencies of adjacent bands within 7

steps.

• Check the playable frequency ranges of the connected speakers

before making the equalizer adjustments. If the speaker’s playable

frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz

or 20 Hz band has no effect. Additionally, you may overload and

damage the speakers.

• When the parametric EQ is adjusted, the adjustment for graphic EQ

becomes ineffective.

L/R: Different adjustment values can be set for the left and

right channels.

L+R: Sets the same adjustment values for the left and right

channels.

68-08564Z42-A_F.book Page 45 Wednesday, January 24, 2007 2:26 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine IVA-W205R Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info