Bedienungsanleitung Alpine IVE-W560BT-R (Seite 28 von 96) (Deutsch, Englisch, Französisch)

661050

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

28-EN

Before installing or connecting the unit, please read the

following and pages 4 to 9 of this manual thoroughly for

proper use.

Warning

MAKE THE CORRECT CONNECTIONS

Failure to make the proper connections may result in ﬁre or product

damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in ﬁre, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE

NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to

electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN

SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to

prevent obstructions when driving. Cables or wiring that obstruct

or catch on locations such as the steering wheel, gear lever, brake

pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other

equipment. Doing so will exceed the current carrying capacity of

the wire and result in ﬁre or electric shock.

DO NOT DAMAGE PIPES OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions

so as not to contact, damage or obstruct pipes, fuel lines, tanks or

electrical wiring. Failure to take such precautions may result in ﬁre.

DO NOT USE NUTS OR BOLTS IN THE BRAKE OR STEERING

SYSTEMS TO MAKE GROUND CONNECTIONS.

Nuts and bolts used for the brake or steering systems (or any

other safety-related system), or tanks should NEVER be used for

installations or ground connections. Using such parts could disable

control of the vehicle and cause ﬁre etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF

THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult

a doctor immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER

VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR

GEAR LEVER.

Doing so may obstruct forward vision or hamper movement etc.

and results in serious accident.

Caution

ONLY TO BE INSTALLED BY A QUALIFIED ELECTRICIAN OR

VEHICLE TECHNICIAN.

The wiring and installation of this unit requires special technical

skill and experience. To ensure safety, always contact the dealer

where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM

SECURELY.

Be sure to use only the speciﬁed accessory parts. Use of other

than designated parts may damage this unit internally or may not

securely install the unit in place. This may cause parts to become

loose resulting in hazards or product failure.

ROUTE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A

SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat

rails) or sharp or pointed edges. This will prevent crimping and

damage to the wiring. If wiring passes through a hole in a metal

component, use a rubber grommet to prevent the wire’s insulation

from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR

DUST.

Avoid installing the unit in locations with a high level of moisture

or dust. Moisture or dust that penetrates into this unit may result in

product failure.

Precautions

• Disconnect the cable from the (–) battery terminal before

installing your IVE-W560BT/IVE-W560BT-R. This will reduce

any chance of damage to the unit in the event of a shortcircuit.

• Be sure to connect the colour coded leads according to

the diagram. Incorrect connections may cause the unit to

malfunction or damage the vehicle’s electrical system.

• When making connections to the vehicle’s electrical system,

be aware of the factory installed components (e.g. on-board

computer). Do not tap into these leads to provide power for this

unit. When connecting the IVE-W560BT/IVE-W560BT-R to

the fuse box, make sure the fuse for the intended circuit of the

IVE-W560BT/IVE-W560BT-R has the appropriate amperage.

Failure to do so may result in damage to the unit and/or the

vehicle. If in doubt, consult your ALPINE dealer.

• The IVE-W560BT/IVE-W560BT-R uses female RCA-type

jacks for connection to other units (e.g. ampliﬁer) having RCA

connectors. You may need an adapter to connect other units. If

so, please contact your authorized ALPINE dealer for assistance.

• Be sure to connect the speaker (–) leads to the speaker (–)

terminal. Never connect left and right channel speaker cables to

each other or to the vehicle body.

• The Display must be completely retracted in the casing when

installing. If not, problems may occur.

• When installing in vehicles, make sure the display can open/

close without coming in contact with the gear lever.

IMPORTANT

Please record the serial number of your unit in the space provided

below and keep it as a permanent record. The serial number plate

is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

Installation and Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine IVE-W560BT-R Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info