Bedienungsanleitung Alpine iXA-W407BT (Seite 17 von 73) (Englisch)

471357

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

15-EN

By this function, you can adjust Treble, Bass and Subwoofer level

directly.

Adjusting Treble/Bass

Touch the dial of Treble/Bass to adjust the desired

setting level.

Setting contents:

Treble level: -7 ~ +7

Bass level: -7 ~ +7

Touch [X] to return to Multi Information main screen.

Adjusting the Subwoofer

Touch [ ] or [ ] of Subwoofer to adjust the desired

setting level.

Setting contents:

Subwoofer level: 0 ~ 15

Touch [X] to return to Multi Information main screen.

• When you return to the Multi Information main screen, the adjusted

value of Treble level, Bass level and Subwoofer level will be

displayed.

• This adjustment can also be made as described under “Setting the

Bass level” (page 13), “Setting the Treble Level” (page 13), and

“Adjusting the Subwoofer Level” (page 12).

When the IMPRINT audio processor (PXA-H100) (sold separately) is

connected to this unit, you can select the MultEQ mode by this function.

Touch area to activate MultEQ mode.

The indicator lights up and the IMPRINT logo appears in the

background.

Touching area again will cancel MultEQ mode.

After the indicator lights up, touch to switch to

Memory 1 (Curve 1) mode and Memory 2 (Curve 2)

mode.

• The above settings can also be made referring to “Changing MultEQ

mode” on page 32.

Rear Entertainment Function

The rear entertainment function independently routes different sources

to the front and the rear inside a car. For example, while listening to the

radio or other audio source in the front, a video of iPhone/iPod can be

enjoyed in the rear with the optional rear monitor and headphones.

Press

SOURCE.

The mode switching screen is displayed.

Touch [RSE].

The rear Select screen appears.

• Touching [ ] will return to the mode switching screen.

Touch the desired source, such as visual (Auxiliary

Output) to select.

• When the “Setting the AUX Mode” (page 22) is set to OFF, the

auxiliary source is not displayed.

• When the “Setting the Picture Output” (page 22) is set to OFF, the

“RSE” item cannot be activated.

Switching Display Modes

While your vehicle is parked, touch [WIDE] on the visual

source screen.

Each touch changes the display modes as follows:

In Mode 1 (Wide), the monitor displays a normal picture wider to

fit in a wide-screen monitor by evenly stretching out the picture

horizontally.

In Mode 2 (Cinema), the monitor displays a normal picture by

stretching out the picture horizontally and vertically. This mode is

good for displaying a cinema type picture at the 16:9 ratio.

In Mode 3 (Normal), the monitor displays a normal picture at the

centre of the screen with a vertical black band at each side.

Sound Controller (Sound Cont.)

IMPRINT Controller

Indicator

IMPRINT logo

MODE 1 MODE 2 MODE 3 MODE 1

(WIDE) (CINEMA) (NORMAL) (WIDE)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine iXA-W407BT Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine iXA-W407BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info