Bedienungsanleitung Alpine KCE-350BT (Seite 4 von 13) (Englisch)

572061

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

3-EN

ALPINE KCE-300BT 68-08564Z70-A (EN)

How to connect to a Bluetooth

compatible device (Pairing)

For details on the control from a Bluetooth compatible

device, refer to the Owner’s Manual of the Bluetooth

compatible device.

Set a Bluetooth connection from a Bluetooth

compatible device.

The PIN code (“0000”) is displayed on the

connected unit.

• The PIN code is fixed as “0000.”

Input the PIN code (“0000”) in a Bluetooth

compatible device.

If the connected unit is successfully

connected to a Bluetooth compatible device,

a paired device name and a registered

number (No. 1 to 4 or guest mode) are

displayed on the unit, and then the unit

returns to normal mode.

• Set “Setting the Search Mode” (page 5) to ON to enable

phone passkey (passcode) input operation, refer to the

mobile’s Owner’s Manual. Additionally, the mobile phone

can be searched directly from an AV head unit. Refer to

“Registering the Bluetooth Device (AV Head Unit only)”

(page 5).

Setup Before Using

About Bluetooth

Bluetooth is a short distance wireless technology to connect a

mobile phone or personal computer. This allows you to

enable a hands-free call or transmit data between Bluetooth

compatible devices.

• Depending on the Bluetooth version, a Bluetooth compat-

ible device may not be able to communicate with this

adapter.

• Proper function of this adapter with all Bluetooth

compatible devices is not guaranteed.

• Depending on the surroundings, Bluetooth wireless

connection may be unstable.

• When you place a call, or perform setup operations, be

sure to stop your car in a safe place.

• For details on the control (selection, enter, cancel) from the

connected unit, refer to the Owner’s Manual of the

respective unit.

• Depending on the connected Bluetooth compatible

device(s), the function may differ. Also refer to the Owner’s

Manual of the connected device(s).

Before Using Hands-Free Phone/

Audio Function

Before using the hands-free phone/audio function, the

following settings need to be made.

Be sure to set “INT MUTE” (in the setup

function of the connected head unit or Digital

Media receiver) to OFF.

• Before making sound interruption on the Bluetooth

compatible device, make sure that INT MUTE is set to

OFF. (Initial setting on the unit is OFF.)

Set “Bluetooth IN” or “Bluetooth” to

ADAPTER*. (Refer to the Owner’s Manual of

the connected units.)

Turn the ignition key off (ACC OFF) and on

again (ACC ON).

• Before using a hands-free phone, it must be paired with the

adapter. Refer to “Bluetooth SETUP” (pages 4-5).

* If “Bluetooth IN” or “Bluetooth” is set to OFF once, the

communication to the adapter is canceled. To resume

communication: reset to ADAPTER, set the ignition key

from ACC to OFF once, and then to ON again.

* When a Bluetooth compatible device is not used, set

“Bluetooth IN” or “Bluetooth” to OFF, and remove the

adapter. If Bluetooth connection of the adapter is

maintained, connection (pairing) error to the adapter may

occur depending on the mobile phone, and result in

malfunction.

the KCE-350BT to recognize a mobile phone. For mobile

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine KCE-350BT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info