Bedienungsanleitung Alpine KCE-400BT (Seite 8 von 13) (Englisch)

471402

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

7-EN

ALPINE KCE-400BT 68-14470Z05-A (EN)

Adjusting the volume when

receiving a Call

While calling, you can adjust the volume. The adjusted

volume level is stored.

Turn the Rotary encoder or the Double

Action encoder to adjust the volume.

•You may need to increase volume from your regular audio

listening source level. However, increasing the volume

excessively may result in feedback. If feedback is noticed as

feedback is directly related to the volume, turn down the

volume as low as acceptable to eliminate it. Positioning the

microphone in a direction away from the main car speakers

(e.g. clipped on sun visor) may also reduce feedback at

high volume.

Redial Function

You can redial the person you have previously called.

After finishing a call, press or within 5

seconds.

The telephone is redialed.

Audio Switching Operation (CD Head

Unit Only)

While making a call, this function allows you to initiate the

transfer of the audio between the mobile phone and the

speakers in the car.

While calling, press and hold ENT for at least 2

seconds to switch the call sound between the

speakers in car and mobile phone.

• Depending on the mobile phone, this operation may not be

performed.

Call History

Call History is recorded for the last dialed/received/missed

calls. There are various ways of making calls based on the

“Call History.” The following steps 1 to 4 are common to the

various ways of making these calls. For details, refer to each

individual category for making calls.

Press or .

The outgoing method list is displayed.

Turn the Rotary encoder or the Double

Action encoder to select the outgoing

mode.

Setting items : DIALED / RECEIVED / MISSED /

PHONE BOOK

DIALED : Dialed history

RECEIVED : Received history

MISSED : Missed incoming history

PHONE BOOK : Mobile phonebook

• The adapter will update the information in the Call History

automatically each time a mobile phone is connected or

receiving/dialing a call. At this time, if you select any

outgoing mode, “UPDATING” will be displayed.

Press ENT.

The outgoing mode is activated, and each mode

list is displayed.

• It may take some time for the list to be displayed, and also

directly after connection, the list may not be brought up to

date.

Turn the Rotary encoder or the Double

Action encoder to select a name or a

telephone number from the list.

Press ENT.

The selected telephone will be called.

If one name has several numbers registered in the

telephone book for CD Head Unit, press ENT after

selecting the name*, then turn the Rotary encoder

to choose the desired number and press ENT, the

telephone will be called. Press and hold ENT for at

least 2 seconds after selecting the name, the

default number of the name will be called.

Depending on the connected mobile phone, this

function may not be performed. (Only for CD Head

Unit)

* If the name cannot be recognized, default number will be

displayed.

• If you place a call directly from the paired mobile phone,

the phone number is not displayed, you cannot redial from

the unit in this case.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine KCE-400BT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine KCE-400BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info