Bedienungsanleitung Alpine PXA-H701 (Seite 14 von 52) (Englisch)

66420

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

12-EN

Settings/Adjustments

(factory default)

*1 When centre is set to subwoofer, it is not

displayed.

*2 When centre is set to subwoofer, it becomes

Sub.W(L).

*3 When centre is set to subwoofer, it becomes

Sub.W(R).

5 Turn the Rotary encoder to select the

frequency, then press the ENTER button.

Adjustable frequencies

Front/Rear/Centre: 20Hz~20kHz (1/3 octave

step)

Sub.W: 20Hz~160Hz (1/3 octave step)

6 Turn the Rotary encoder to adjust the level (± 9

dB in steps of 1 dB), then press the ENTER

button.

7 Repeat steps 5 and 6 to adjust other

frequencies.

8 To adjust other channels, press the CHANNEL

button to return to step 4.

* The difference in the sound when the defeat

mode is turned off (adjusted graphic

equalizer settings) and on (default values)

can be checked as follows:

1) While in the adjustment mode, press and

hold the G.EQ button for at least 2 seconds.

2) Press the G.EQ button to switch the defeat

mode on and off and listen to the difference

in the sound.

3) To quit, select the desired setting, then press

the ENTER button.

Note that if you press the ENTER button with

the defeat mode turned on, the adjustments

are reset to the defeat on status (the default

values).

9 Once the adjustments are completed, press the

G.EQ button.

NOTES

• When the speaker is set to the “OFF” mode, the

graphic equalizer for that speaker is ineffective.

Refer to “Setting the speakers” (page 4).

• Check the playable frequency ranges of the connected

speakers before making the equalizer adjustments. If

the speaker’s playable frequency range is 55 Hz to 30

kHz, for example, adjusting the 40 Hz or 20 Hz band

has no effect. Additionally, you may overload and

damage the speakers.

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

• When graphic EQ is adjusted, the adjustment for

parametric EQ becomes ineffective.

CHANNEL

ENTER

G.EQ

P.EQ

Rotary encoder

Graphic equalizer adjustments

The graphic equalizer allows you to modify the

sound using 31 bands each for the front (left and

right), rear (left and right) and centre speakers.

An additional 10 bands are available for the

subwoofer. This allows you to customize the

sound to suit your taste.

1 Check that the defeat mode is off.

(See page 28.)

2 Press the G.EQ button to set the graphic

equalizer mode.

3 Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR):Sets the same adjustment values

for the left and right channels.

L or R: Different adjustment values can be

set for the left and right channels.

4 Press the CHANNEL button to select the desired

channel, then press the ENTER button.

When “L and R (LR)” is selected:

When “L or R” is selected:

Front Rear Center

Sub. W

Rear R

Center

Sub. W

Front L Front R

Rear L

*2*3

31– .E

Front LG

– 9dB

12.5kHz

L and R (LR) L or R

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine PXA-H701 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info