Bedienungsanleitung Alpine RUX-C800 (Seite 33 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

31-EN

01GB06PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From a PC

Customizing EUPHONY

You can customize the sense of ambience (localization and ambience)

of the cabin sound field and the balance (Level) between surround

channels and save the settings.

Click [Custom] for “EUPHONY.”

The EUPHONY custom screen is displayed.

Click [Standard], [Wide], or [Off] in the “Localization/

Ambience” to choose the localization/ambience.

Standard: Setup of the regular ambience of Ls/Rs sound.

Choose this for a subtle expansion in sound.

Wide: The ambience of Ls/Rs sound is more easily

recognizable. Use this when you want brightness

and crispness.

OFF: This disables EUPHONY.

Adjust the localization/ambience for each channel.

Drag [ ] for “Localization/Ambience” or click [ ]

or [ ].

Setting channel: C (Center), L (Left Front) / R (Right Front),

Ls (Left Surround) /Rs (Right Surround)

Setting contents: 0.0 to 1.0 (in 0.05 steps)

Click either [ ] or [ ] for “L/R Group.”

: Both R and L channels are set at the same value.

: Channels R and L can be set independently.

• When you select “ ,” a message to confirm which of the R or L

channel set up values is to be applied will be displayed. Click either

[LEFT] or [RIGHT].

Adjust the level for each channel. Drag [ ] for

“EUPHONY Output Level” or click [ ] or [ ].

Setting channel: C (Center), L (Left Front) / R (Right Front),

Ls (Left Surround) /Rs (Right Surround)

Setting contents: -12 to 0 dB (in 0.05 steps)

Click [Store] for “Custom Memory” to save the

settings.

The Memory selection screen is displayed.

Click either [Custom 1], [Custom 2], or [Custom 3]

and click [OK].

When setting is complete, click [Close Window].

• This setting is only available for 2-channel signal playback.

• If you click [Call] in Step 6, you can call and readjust the stored

setting values. Click either [Custom 1], [Custom 2], or [Custom 3] in

the setting value selection screen and click [OK].

• By clicking of “Mute” while in the adjustment mode, you can

mute the selected channel.

Pro Logic processing can be applied to the music signals recorded in 2-

channel stereo. This gives normal 2-channel stereo a more live, concert

hall effect. When you select “Music,” you can adjust the center width.

This function provides the optimum vocal localization by adjusting the

center channel localization in between the center speaker and the L/R

speakers. (Initial setting: “Music”)

Click [ ] for “2ch Playback Mode” and select and

click [Dolby Pro Logic II] from the pull-down menu.

Click either [Music] or [Movie] for “Dolby Pro Logic

II.”

Music: Suits stereo TV shows and all programs encoded in

Dolby Surround. Creates a sound field directivity

near that of discrete 5.1-channel sound.

Movie: Can be used for all stereo music recordings, and

provides a wide, deep sound field.

• For details on Dolby Pro Logic II, see page 61.

• This function only works with 2-channel signals.

Using Dolby Pro Logic II (Dolby Pro Logic

II)

01GB00PXAH800.book Page 31 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info