Bedienungsanleitung Alpine RUX-C800 (Seite 48 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

46-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Select the level you want by rotating the [Rotary

encoder], and press the [Rotary encoder].

Compressed 1 to 3:

This corrects information lost in the compression process. This

reproduces a well-balanced sound close to the original. By

supplementing mid- to high- frequency sound data, the sound is

reproduced with more brightness and ambience.

Music 1 to 3:

Lower register sounds (drums, bass, etc.) and vocals are

emphasized for clean and clear output.

Cinema:

Video dialogue is reproduced more clearly. Action movies are

reproduced with more powerful sound.

Action:

Action movies are reproduced with more powerful sound.

Drama/Talk:

The dialogue portion of a video is reproduced more clearly.

• When “Non Effect” is selected, MX Plus becomes disabled.

• Sources to be set vary depending on the system set in “Setting the

AUX Input System (AUX Input Setup)” (page 39).

To adjust another source, press [ ] and repeat

Steps 8 through 9.

• You can listen with Defeat OFF (adjusted setup values) or with

Defeat ON (Initial value) to compare, by following the steps below.

1 Press and hold the [Rotary Encoder] for 2 seconds or

longer while in the adjustment mode.

2 Rotate the [Rotary Encoder] to switch on/off Defeat, and

listen to compare.

3 To exit, select “OFF” and then press [ ].

When the setting is complete, press and hold [ ]

for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• This function is not available when Defeat is set to ON.

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Setting the Equalizer Mode (EQ Mode)

You can choose either the Graphic EQ or the Parametric EQ for the

equalizer mode. You can also turn it off. (Initial setting: “OFF”)

Press [FUNC.].

Rotate the [Rotary encoder] to select “Sound Field

Adj.,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “Setup,” and

then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “EQ Mode,”

and then press the [Rotary encoder].

Select either “G.EQ,” “P.EQ,” or “OFF” by rotating

the [Rotary encoder], and press the [Rotary

encoder].

G.EQ: Graphic EQ is used.

P.EQ: Parametric EQ is used.

OFF: EQ mode is disabled.

When the setting is complete, press and hold [ ]

for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• This function is not available when Defeat is set to ON.

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Setting the Graphic EQ

The graphic equalizer allows you to modify the sound using 31 bands

each for the front (left and right), rear (left and right) and center

speakers. An additional 10 bands are available for the subwoofer. This

allows you to customize the sound to suit your taste.

• Set “Setting the Equalizer Mode (EQ Mode)” on page 46 to “G.EQ.”

Press [FUNC.].

Rotate the [Rotary encoder] to select “Sound Field

Adj.,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “EQ

Adjustment,” and then press the [Rotary encoder].

The G-EQ screen is displayed.

Press and hold [CHANNEL] for at least 2 seconds.

Rotate the [Rotary encoder] to select either “L+R” or

“L or R,” and press the [Rotary encoder].

L or R: Channels Right and Left can be set independently.

L+R: Both Right and Left channels are set at the same

value (The initial setting).

• When you switch from “L or R” to “L+R,” choose which adjustment

of the R and L channels to be applied.

1 Select either “L R” or “R L” by rotating the [Rotary

encoder], and press the [Rotary encoder].

L R: The adjustment of the Left channel is to be applied

to both Right and Left channels.

R L: The adjustment of the Right channel is to be applied

to both Right and Left channels.

G.EQ

EQ MODE

01GB00PXAH800.book Page 46 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info