Bedienungsanleitung Alpine tda 7592 r (Seite 23 von 38) (Englisch)

168570

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

21-EN

Cassette

Dolby B NR (Noise Reduction)

1 After inserting a Dolby B NR encoded tape,

press the B NR button.

The display shows the "B NR" The tape noise is

reduced in the Dolby NR mode when a Dolby B

NR encoded tape is played.

Press the B NR button to cancel the Dolby NR

mode.

Repeat Play

1 Press the REPEAT button to play back

repeatedly the current programme being played.

The RPT indicator appears and the programme

will be played repeatedly.

Press the REPEAT button to stop the repeat

play. The RPT indicator disappears.

Blank Skip (B.SKIP)

1 Press the B.SKIP button during tape play to skip

over blank portions of the tape lasting 15 seconds

or longer, "B.SKIP" appears on the display.

Press the B.SKIP button to cancel the blank skip

mode. "B.SKIP" disappears from the display.

Fast Forward and Rewind

1 Press the g DN or f UP button during

tape play to fast rewind or forward the tape

respectively.

The tape side indicator (

or ) blinks and >>

or << moves indicating the direction of the tape.

When the end of the tape is reached in the

rewind mode, the player stops automatically and

begins playing from the beginning of the same

side. When the end of the tape is reached in the

fast forward mode, the player stops automatically

and begins playing from the beginning of the

opposite side.

2 Press the f UP button during forwarding to

stop fast forwarding and resume tape play.

Press the g DN button during rewinding to

stop rewinding and resume tape play.

The tape side indicator stops blinking.

Scanning Programmes

1 Press the SCAN button to play the first 10

seconds of each programme on the tape.

"SCAN" appears on the display.

Press the SCAN button to cancel the scanning

when the desired programme is found.

NOTE

The SCAN operation cannot detect blank sections of less

than 4 seconds.

Manual Reverse

1 Press the PROG button during tape play to

change the tape direction to play the other side

of the tape.

The tape side indicators (

and ) change to

show which side of the cassette is being played.

Programme Sensor (P.S.)

1 Press the P.S. DN button once during tape play

to return to the beginning of the current selection

being played.

If you wish to return to a selection further back,

press repeatedly until the number of selections

you would like to skip is shown in the display.

The display will show PS-1 with the first press

and will increase by one with each successive

press up to PS-9. The tape indicator will blink

showing the direction of your search.

Press the P.S. UP button once during tape play

to advance to the beginning of the next selection.

If you wish to advance to a selection further

ahead, press repeatedly until the number of

selections you would like to skip is shown in the

display.

The display will show PS+1 with the first press

and will increase with each successive press up

to PS+9. The tape indicator will blink showing the

direction of your search during searching

operation.

NOTES

• The programme sensor feature is functional in the tape

play mode only.

• You can advance to the 9th (max.) programme or

return to the 8th (max.) programme.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine tda 7592 r Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info