Bedienungsanleitung Alpine tda 7592 r (Seite 27 von 38) (Englisch)

168570

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

25-EN

Changer

→ FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER

DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←

Searching for Titled Discs

If a CD is titled, you can do a search for it. (To title

CDs, refer to "Titling Discs" on page 24.)

1 Press and hold the T.S.M. button for at least 2

seconds. The title blinks in the display.

2 Press the g DN or f UP button to select

the desired disc title.

3 Press the T.S.M. button to play the selected disc.

The unit will automatically search for the disc

and begin play.

4 Press the T.S.M. button for at least 2 seconds to

cancel the disc searching mode.

NOTE

This function cannot be performed when using a multi-

changer switching device.

CD Text Scroll Setting

This CD player has the ability to scroll the disc

and track name recorded on CD-Text discs. The

scrolling feature will work with names greater than

8 characters.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the f UP button repeatedly to select

"SCR".

Each press of the f UP button changes the

modes as shown:

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

3 Press the TUNE button to toggle mode between

SCR AUTO and MANU.

• SCROLL AUTO: the display of CD text is

scrolled continuously.

• SCROLL MANUAL: the display is scrolled only

when a disc is loaded or when a track is

changed.

4 When the setting is completed, press the SETUP

button to return to the normal mode.

NOTES

• Initial mode is "SCR MANU."

• The unit scrolls only CD text names. The disc titles

input manually (refer to page 24) cannot be scrolled.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers,

the KCA-400C (Multi-Changer Switching device)

must be used. If you use 1 Switching device, you

can connect up to 4 CD Changers. If you use 2

Switching devices, you can connect up to 6 CD

Changers. When using KCA-410C (Versatile Link

Terminal), you can connect two changers and two

external outputs (AUX).

1 Press the SOURCE button to activate the CD

Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (RUE-4187) to activate the CD

Changer mode. Proceed to Step 3 below to

select the desired CD Changer.

2 Press the BAND button or the RUE-4187 to

activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active

for 3 seconds after Step 2 is performed. Press

the BAND button until the desired CD Changer

indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display

will show "NO CHGRX."

Alternatively press the BAND button on the

Remote Control until the desired changer

indicator appears on the display.

4 Operate the selected changer.

NOTE

For further details about the external input (AUX) when

using KCA-410C, see ”Setting the AUX Mode (V-Link)"

on page 8.

SOURCE

BAND

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine tda 7592 r Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info