Bedienungsanleitung Alpine UTE-81R (Seite 11 von 34) (Englisch)

536901

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

11-EN

Receiving RDS Regional (Local) Stations

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP selection mode.

Turn the Rotary encoder to select the “TUNER” setup

mode, and then press ENTER.

Turn the Rotary encoder to select the “REGIONAL”, and

then press ENTER.

Turn the Rotary encoder to select “REG ON” or “REG OFF”.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Press r to return to the previous mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

PI SEEK Setting

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the “TUNER” setup

mode, and then press ENTER.

Turn the Rotary encoder to select “PI SEEK”, and then

press ENTER.

Turn the Rotary encoder to select “PISEEK ON” or “PISEEK

OFF”.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Press r to return to the previous mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Receiving Traffic Information

Press and hold BANDTA for at least 2 seconds so that the

“G” indicator lights up.

Press  or  to select your desired traffic information

station.

When a traffic information station is tuned in, the “T”

indicator lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode. When a traffic information broadcast begins, the

unit automatically receives it and the display shows “TRF-INFO”

for 2 seconds.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

Notes

• If you do not want to listen to the traffic information being received,

lightly press BANDTA to skip that traffic information message. The TA

mode will remain in the ON position to receive the next traffic

information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

Receiving Traffic Information While Playing

USB Audio or Radio

Press and hold BANDTA for at least 2 seconds so that the

“G” indicator lights up.

Press  or  to select a traffic information station if

necessary.

When a traffic information broadcast starts, the unit

automatically mutes the audio source (such as regular FM

broadcast, USB AUDIO, etc.).

When the traffic information broadcast finishes, the unit

automatically returns to the original source play before the

traffic information broadcast began.

When traffic information stations cannot be received:

In the tuner mode:

When the TP signal can no longer be received for over 1 minute,

the “G” indicator blinks.

In other audio source mode:

When the TP signal can no longer be received, the traffic

information station of another frequency will be selected

automatically.

Note

• The receiver is equipped with the EON (Enhanced Other Networks)

function in order to keep track of additional alternate frequencies to

the AF list. If the station being received does not broadcast the traffic

information, the receiver automatically tunes in the related station that

broadcasts the traffic information when it occurs.

Press and hold BANDTA for at least 2 seconds to

deactivate the Traffic Information mode.

The “G” indicator goes out.

Displaying Radio Text

Text messages from a radio station can be displayed.

Press VIEW while receiving FM in the radio mode to select

the Radio Text display.

The display will change every time the button is pressed.

For details, refer to “Displaying the Text” on page 19.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine UTE-81R Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine UTE-81R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info