Bedienungsanleitung Alpine UTE-92BT (Seite 14 von 50) (Englisch)

660389

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

14-EN

Playback

Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically.

Note

• When a disc is already inserted, press VSOURCE to switch to the

DISC mode.

While playing back MP3/WMA/AAC, press  or  to select

the desired folder.

Press  or  to select the desired track (file).

Pressing and holding  or  will fast backward/fast

forward track continuously.

To pause playback, press .

Pressing  again will resume playback.

To eject the disc, press .

Notes

• Do not remove a CD during its eject cycle. Do not load more than one

disc at a time. A malfunction may result from doing either.

• Three-inch (8 cm) CDs cannot be used.

• Any file protected by DRM (Digital Rights Management) copy

protection, cannot be played back on this unit.

• The track display for MP3/WMA/AAC data playback is the file

numbers recorded on the disc.

• The playback time may not be correctly displayed when a VBR

(Variable Bit Rate) recorded file is played back.

• This unit does not support FLAC format disc’s playback.

Repeat and Random Play

During playback, Press z 4 or 5 x repeatedly until the

setting appears.

RPT ONE:

Track/file is played back repeatedly.

RPT FOLDER

Files in a folder are played back repeatedly.

MIX FOLDER

Files in a folder are played back randomly.

MIX ALL:

All files in the disc or USB Memory are played back randomly.

* When MP3/WMA/AAC files are played back.

To cancel repeat or M.I.X. play, select (OFF) with the above

procedure.

Notes

• a indicator lights up during repeat play mode.

• s indicator lights up during random play mode.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using

their recorded titles. For discs without CD Text, searches are made using

the track numbers associated with each song.

Press ENTER during play.

Turn the Rotary encoder to select the desired track, and

then press ENTER.

This will play the selected track.

Notes

•Press any of the preset buttons (1 through 6) during a search to skip

over a calculated percentage of tracks. For details, refer to “Direct

Search Function” on page 39.

•Press t in the search mode to cancel. Or, the search mode is cancelled

if no operation is performed for 60 seconds.

• When CD Text Search is made during M.I.X. play, the M.I.X. play

mode will be cancelled.

Folder/File Name Search

(concerning MP3/WMA/AAC)

Folder and file names may be searched and displayed during playback.

During MP3/WMA/AAC playback, press ENTER to

activate the search mode.

Turn the Rotary encoder to select Folder Name Search

mode, and then press ENTER.

Turn the Rotary encoder to select the desired folder.

Press and hold ENTER for at least 2 seconds to play

back the first file in the selected folder.

Notes

•Press any of the preset buttons (1 through 6) during a Folder Name

search to skip over a calculated percentage of folders. For details, refer to

“Direct Search Function” on page 39.

CD/MP3/WMA/AAC

(CDE-193BT only)

/ENTER







/SOURCE





Rotary encoder

Preset buttons

(1 through 6)

Folder Name Search mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine UTE-92BT Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine UTE-92BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info