Bedienungsanleitung Alpine X800D-ML (Seite 24 von 116) (Englisch)

572063

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

24-EN

Touch the size of the front speaker.

Select whether or not there is a tweeter.

Select the installation position of the rear speaker.

If you select “No rear speaker”, you cannot adjust the rear

speaker in Time Correction/X-OVER in sound setup.

Select whether or not there is a subwoofer.

If you select “No”, you cannot adjust the subwoofer level/

subwoofer phase in sound setup.

Select the material of the car seats.

The settings confirmation screen is displayed.

• If the car seats are made of both leather and fabric, select

[Half leather].

Check the settings and touch [OK].

• If Preset3 was already saved for Time Correction/X-OVER/

Parametric EQ, the data will be overwritten.

• The Easy sound settings are reflected in the following Sound Setup

items.

Setting the MX (Media Xpander)

- Adjusting the Parametric Equalizer Curve (Parametric EQ)

Adjusting the Time Correction (Time Correction)

Adjusting the Crossover Settings (X-OVER) (only when

Subwoofer is set to [On])

The Equalizer Presets settings are disabled.

Downloaded Sound Settings

Using a USB memory device, the sound settings downloaded from the

ALPINE website can be used to configure Time Correction, X-OVER

and Parametric EQ settings.

Setting item: Downloaded Sound Settings

The file name of download data shall be

“A_U*****.MP3”.

• Save the setting data in the root folder.

• For details about procedures of download, see ALPINE’s web site.

Touch [Downloaded Sound Settings].

Setting data files are displayed in a list with a maximum of 5

items.

Touch the desired file.

Touch [OK].

The downloaded setting values are set as the Time

Correction/X-OVER/Parametric EQ settings, and at the

same time saved as Preset3, respectively.

• When no downloaded file is detected in the connected USB memory,

the “Downloaded Sound Settings” function is not available.

• If Preset3 was already saved for Time Correction/X-OVER/

Parametric EQ, the data will be overwritten.

Easy Setup

This unit provides the custom settings for your vehicle. You can select it

to be easily fit your audio settings.

Touch [EASY SETUP].

The EASY SETUP screen is displayed.

Touch [Mercedes M-Class,W164].

Easy Sound Setup mode/BASS ENGINE

SQ mode

During normal source play mode, you can activate Easy Sound Setup

mode by pressing and holding AUDIO for at least 3 seconds. Fader/

Balance/Bass level/Treble level/Subwoofer level and BASS ENGINE

SQ can be adjusted in this mode.

Adjust the Fader/Balance/Bass level/Treble level.

Display example for Easy Sound Setup screen

• You can choose to display this menu on the left or right of the screen.

For details, refer to “Setting the Easy Sound Setup Position” on

page 58.

• Subwoofer level is not adjustable when SubW. is Off. (Page 52)

• The Fader/Balance setting is reflected to “Setting the Balance/

Fader” (page 52).

• In BASS ENGINE SQ mode, touch [BASS ENGINE SQ] to switch to

Easy Sound Setup screen.

Extender (fixed)

Identifier (alphabet or number

5 letters maximum)

Header (fixed)

Easy Sound Setup mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D-ML Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D-ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info