Bedienungsanleitung Alpine X800D-ML (Seite 49 von 116) (Englisch)

572063

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

49-EN

Touch [] of the desired item.

Settable items differ depending on the application.

[Video] (Video media):

Display Mode*

/ Live Contrast / Visual EQ / Bright / Colour /

Tint / Contrast / Sharp

[Direct Camera]*

Live Contrast / Bright / Colour / Contrast

[AUX Camera]*

Live Contrast / Bright / Colour / Contrast

[Navigation]:

Bright / Contrast

When media is set to AUX, the settings cannot be changed in the

situations below.

• When AUX name is set to DVB-T and “Direct Touch” is set to

On (page 62), the Display Mode setting is fixed as WIDE.

The camera names set under the “Direct Camera/AUX Camera”

settings are displayed. The camera names are not displayed when

“Off” is set (pages 67 to 68).

Touch [] or [] to change its setting.

Touch [] to return to the previous screen.

• Immediately after changing the settings of Display Setup (While the

system is writing data automatically) do not turn the ignition key to

OFF. Otherwise, the settings may not be changed.

Setting item: Display Mode

Setting contents: WIDE (Initial setting) / CINEMA / NORMAL

In WIDE mode, the monitor displays a normal picture wider to fit

in a wide-screen monitor by evenly stretching out the picture

horizontally.

In CINEMA mode, the monitor displays a normal picture by

stretching out the picture horizontally and vertically. This mode is

good for displaying a cinema type picture at the 16:9 ratio.

In NORMAL mode, the monitor displays a normal picture at the

centre of the screen with a vertical black band at each side.

This function automatically adjusts the areas on the screen that are too

bright or too dark and corrects them to natural brightness.

Setting item: Live Contrast

Setting contents: OFF (Initial setting) / LOW / HIGH

You can select a mode suitable for the subject image.

Setting item: Visual EQ

Setting contents: OFF (Initial setting) / NIGHT M. / SOFT /

SHARP / CONTRAST

• To return to the default video settings, set this function to OFF. Any

Visual EQ selection or changes made are reset their initial settings.

Setting item: Bright

Setting content: -14 to +14 (Initial setting: 0)

You can adjust the brightness between MIN (-14) and MAX

(+14). When it reaches the minimum or maximum point, the

display shows “MIN” or “MAX” respectively.

Setting item: Colour

Setting content: -14 to +14 (Initial setting: 0)

You can adjust the colour between MIN (-14) and MAX (+14).

When it reaches the minimum or maximum point, the display

shows “MIN” or “MAX” respectively.

Setting item: Tint

Setting content: R15 to G15 (Initial setting: 0)

Adjust the colour from R15 to G15.

Switching Display Modes

Adjusting the Live Contrast

Selecting the Visual EQ Mode

(Factory’s setting)

OFF: Initial Setting

NIGHT M.: Suitable for movies in which dark scenes

frequently appear.

SOFT: Suitable for CGs and animated films.

SHARP: Suitable for old movies where images are not

clearly shown.

CONTRAST: Suitable for recent movies.

Adjusting Brightness

Adjusting Colour of Picture

Adjusting Tint of Picture

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D-ML Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D-ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info