Bedienungsanleitung Alpine X800D-ML (Seite 108 von 116) (Englisch)

572063

108

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

108-EN

Radio Antenna Receptacle

ISO/JASO Antenna Adapter (sold separately)

ISO/JASO Antenna Adapter may be required, depending on

the vehicle.

Digital Output Terminal (Optical)

Use when combining fiber optic digital input compatible

products. Be sure to use the Optical Digital Cable

(KWE-610A) (sold separately) only.

iPod VIDEO Input Connector

Input the iPod/iPhone video signal or AUX video/audio

signal.

• Set “AUX3 In Sel.” (page 62) to “iPod Video” when an

iPod/iPhone is connected.

• Set “AUX3 In Sel.” (page 62) to “AUX3” when AUX video/

audio is input.

MIX Control Lead (Green/White)

Use when an optional External Audio Processor with guide

control input terminal is connected.

• When this lead is connected to PXA-H800, make sure to

turn the ignition key off (ACC OFF) and on (ACC ON)

again or turn the unit power off and on again, after setting

“Navi Mix” from OFF to ON on PXA-H800.

Steering Remote Control Interface Connector

To steering remote control interface box.

For details about connections, consult your nearest Alpine

dealer.

Beep/NAVI Guide Connector

Output the audio signal of navigation interruption.

When connecting an Audio processor, connect this lead to

the Guide Input terminal with an optional RCA Extension

cable.

Direct CAMERA Input Connector

Use when the optional direct camera is connected.

CAMERA Input RCA Connector (Yellow)

Use when connecting a camera with RCA Output

Connector.

CAN Interface Connector (Not used for Benz

M-Class.)

To CAN Interface box.

• When both CAN Interface box and Vehicle Display

Interface box are connected to this unit, the operation

may not be performed as normal.

Remote Control Output Lead (Brown)

Connect this lead to the remote control input lead. This lead

outputs the controlling signals from the remote control.

Remote Control Input Lead (Brown)

Connect the external Alpine product to the remote control

output lead.

Speed Sensor Lead (Green/White)

Improper connection of the speed pulse line may cause

important safety features of the vehicle to fail (such as the

brakes or air bags). Such failures may result in an accident

and loss of life. We strongly recommend that the installation

be performed by a trained, authorised Alpine dealer.

Video Input Connector (AUX INPUT) (Yellow)

Input the video.

Audio Input Connectors (AUX INPUT)

RED is right and WHITE is left input the audio.

Video Output Connector (AUX OUTPUT) (Yellow)

Output the video.

Audio Output Connectors (AUX OUTPUT)

RED is right and WHITE is left output the audio.

Rear Output RCA Connectors

It can be used as Rear Output RCA Connectors.

Front Output RCA Connectors

It can be used as Front Output RCA Connectors.

Subwoofer RCA Connectors

RCA Extension Cable (sold separately)

HDMI input Connector

Input HDMI signal, you should prepare an optional Alpine

special HDMI cable.

USB Connector

To USB Memory or iPod/iPhone.

GPS antenna Receptacle

Connect to GPS antenna (included).

Vehicle Display Interface Connector

Outputs Vehicle Display Interface control signals. Connect

this to the optional Vehicle Display Interface box.

For details about connections, consult your nearest Alpine

dealer.

• When both CAN Interface box and Vehicle Display

Interface box are connected to this unit, the operation

may not be performed as normal.

DAB Antenna Connector

To DAB Antenna (sold separately).

EXT KEY Connector

To external key panel.

AUX/PRE OUT Connector

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

Reverse Lead (Orange/White)

Connect to the plus side of the car’s reverse lamp. This

lamp illuminates when the transmission is shifted into

reverse (R).

With this lead properly wired, the video picture

automatically switches to the rear camera whenever the car

is put into reverse (R).

Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the parking

brake switch to transmit the parking brake status signals to

the X800D.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse

box or another unused power source which provides (+)

12V only when the ignition is turned on or in the accessory

position.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.

Make sure the connection is made to bare metal and is

securely fastened using the sheet metal screw provided.

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna,

if applicable.

• This lead should be used only for controlling the vehicle’s power

antenna. Do not use this lead to turn on an amplifier or a signal

processor, etc.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s

battery.

Fuse Holder (15A)

ISO Power Supply Connector

Left Rear (+) Speaker Output Lead (Green)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D-ML Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D-ML

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info