Bedienungsanleitung Alpine X800D Navi Station (Seite 19 von 116) (Englisch)

661086

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

19-EN

Turning Power On or Off

Some of this unit’s functions cannot be performed while the vehicle is in

motion. Be sure to stop your vehicle in a safe location and apply the

parking brake, before attempting these operations.

Turn the ignition key to the ACC or ON position.

The system turns on.

• When turned on, the system displays the last mode screen that

was displayed before the ignition key was turned off. For

example, if the unit is in radio mode when ignition is turned off,

it will remain in radio mode when ignition is turned back on.

Press and hold the button for at least 3 seconds

to turn the power off.

• The unit can be turned on by pressing any button.

• The X800D is a precision device. Careful handling of the unit should

provide you with years of trouble-free operation.

Turning the System On

With the Alpine system, when the ignition key is turned to ACC or ON,

the opening screen will be automatically displayed.

When the system is used for the first time, the

language selection menu is displayed. There are 24

languages to choose from. Touch [] or [] to

scroll the list, and then touch the desired language.

• You can also scroll through lists by touching the screen and

sliding your finger up and down.

Touch [OK].

The radio screen is displayed.

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first

time, after changing the car battery, etc.

Turn off the unit power.

Press RESET switch with a ballpoint pen or similar

pointed object.

Inserting/Ejecting a Disc

Press c (Eject).

The Open/Tilt screen is displayed.

Touch [c Disc].

Insert the disc with the label side facing up.

Insert the disc until it is automatically pulled into the unit.

The unit starts to play the disc.

* The SD memory card does not support Music/Video playback.

For details on how to use SD memory cards, refer to “Navigation

System OM” on the supplied CD-ROM.

• To remove the SD memory card, touch [ SD].

• Insert the SD memory card into the slot until it is locked.

If the SD memory card is not inserted properly, the monitor cannot be

closed.

Press c (Eject).

The Open/Tilt screen is displayed.

Touch [c Disc].

The monitor will open. Then the disc is ejected.

When the disc has been ejected part way, take it out.

• Even if no disc is inserted, the monitor will open after touching

[c Disc].

Touch [Close], or press any button.

• If the disc does not eject after touching [c Disc], press and hold

c (Eject) for at least 5 seconds.

• Do not apply shock to the monitor when it is open as it may result in

malfunction of the unit.

• The monitor will stop at the set tilt angle when closing.

RESET switch

Inserting the Disc

Removing the Disc

CAUTION

Keep hands (or any other object) away from the monitor while it

is opening or closing to avoid damage or injury. The back of the

monitor tends to become very warm under normal operating

conditions. This is not a malfunction, but care should be taken to

avoid prolonged contact with it.

SD memory

card slot*

Disc Slot

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine X800D Navi Station Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine X800D Navi Station

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info