541730
6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
4
IfyoulikeyoucanusetheEQontheMICchanneltoadjusthighandlowfrequencies.
Some tips to help you set up your mixer
1. ZERO THE CONTROLS
At this stage leave the POWER cord disconnected from the mixer.
Turn down all the GAIN, LEVEL controls.
Keep EQ and PAN/BAL controls on center position.
Turn down PHONES and MAIN MIX controls.
2TRACK TO MIX and 2TRACK TO PHONE switches should be up.
2. C0NNECTIONS
From the MAIN OUPUT socket connect your amplifier or powered speakers.
Connect a dynamic microphone to the MIC 1 input.
Connect mono or stereo line-level signals to the LINE input jacks.
Turn down all controls as suggested above.
Only at this stage connect the supplied AC Adaptor to the mixer and to the
AC Outlet. You should also plug in into the AC outlet the other components of
your Sound systems such as amplifiers, powered speakers, sound processors,
etc. Make sure that the AC outlet are properly grounded and able to deliver
enough current.
Now turn on all the power switches and leave the amplifier switch for last.
At this point turn up of a quarter the MAIN MIX giant blue knob and you are
ready to set the other levels.
3. LEVEL SETTING FOR THE MIC/LINE CHANNEL
Connect a dynamic microphone or a line-level instrument as described above.
in the microphone at normal volume or play the instrument at normal level.Sing
While singing or playing turn up the relative gain ( TRIM ) so that the PEAK LED
next to the LEVEL control starts blinking.
Now start to raise the channel LEVEL until you hear your noise comfortably.
Now you can turn up the big blue MAIN MIX control for a listening level you are
comfortable with.
4. LEVEL SETTING FOR THE STEREO LINE CHANNELS
PlayamonoorstereoinstrumentconnectedtotheLINEINjacks.
Now turn up the instrument output level control until the PEAK LED next to
The LEVEL control starts blinking.
Turn up the LEVEL control until is about equal in volume to the microphone.
Connected to Channel 1.
3. READY TO START?
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alto Professional AMX-80 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info