Bedienungsanleitung Alto Professional Black 15 (Seite 6 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

541739

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Using the Live Drive App

Black Series loudspeakers also come equipped with wireless technology and the unmatched

capabilities of the Alto Professional Live Drive wireless speaker app. You’ll be able to level-

match, adjust EQ and compression, time-align and more. The Black Series puts active live

sound control at your fingertips. Using the app on your iPad, iPhone, or iPod touch, you can

adapt the speakers to new venues or tweak settings remotely from any corner of the room.

Black Series loudspeakers offer a powerful new experience, not only for your audiences, but

also for you—you get streamlined, sound-shaping capabilities at your fingertips.

Downloading the App

To download the App, just search for Live Drive in the App Store

and download the Alto

Professional Live Drive app.

Bluetooth Pairing

About Range: Black Series loudspeakers use an advanced, extended-range Bluetooth

antenna design, allowing for ranges far greater than traditional Bluetooth devices. The typical

range is approximately 100 feet (30 meters) with a clear line of sight. However, the range may

vary depending on your source device and the environment.

To maximize the range:

• Set your source device on a flat surface and make sure there are no obstacles between

the loudspeaker and your device (e.g., walls, furniture, etc.).

• Turn off your source device’s Wi-Fi.

• Turn off any unneeded 2.4 GHz devices in the nearby vicinity (e.g., other Bluetooth

devices, baby monitors, Wi-Fi access points, microwave ovens, etc.).

• Try using a different Bluetooth source device (iPad or iPhone). Bluetooth signal strength

varies between different devices.

To pair the speaker to your Bluetooth device:

1. Do this on one loudspeaker only: With the loudspeaker powered on, press and release its

Pairing Button. Its Pairing LED will flash.

2. From your Bluetooth device’s settings page, enable Bluetooth and select Black Series as

the device. When paired successfully, the Pairing LED will light continuously. (This

process may take up to 30 seconds.)

Important: If your device prompts you to enter a PIN code to pair it to the speaker, enter

0000 (four zeros).

3. Once your device is paired to the speaker, the speaker will remember the device even

after power-cycling it. If the device does not reconnect automatically, go to your device’s

Bluetooth settings page and select Connect to reestablish the connection.

To erase all previous pairing and linking settings, press and hold the Pairing Button for 10

seconds. The LED will also flash to confirm the pairing records are erased. Now, you can pair

to a new device.

Live Drive Operation

For more information about using Live Drive, visit altoprofessional.com/livedrive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alto Professional Black 15 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info