Bedienungsanleitung Amana AGG222 (Seite 6 von 16) (Englisch)

506783

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition

and uneven flames. Always clean the burner cap after a spillover

and routinely remove and clean the caps and bases according to

the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other

material to enter the gas tube opening. Keep spillovers out of the

gas tube by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Do not use oven cleaners, bleach

or rust removers.

1. Remove the surface burner grates.

2. Remove burner cap from the burner base and clean

according to “General Cleaning” section.

3. Clean the gas tube opening with a damp cloth.

4. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

5. Replace the burner cap onto the burner base, making sure

the alignment pins are properly aligned with the burner cap.

6. Replace surface burner grates.

7. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

burner yourself. Contact a trained repair specialist.

Home Canning

When canning for long periods, alternate the use of surface

burners between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural

department. Companies that manufacture home canning

products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a

well-fitting lid, and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and

copper may be used as a core or base in cookware. However,

when used as a base they can leave permanent marks on the

cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

Use the following chart as a guide for cookware material

characteristics.

A. 1-1½" (2.5-3.8 cm)

B. Burner ports

A. Incorrect

B. Correct

COOKWARE CHARACTERISTICS

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for

most cooking tasks.

Cast iron ■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

Ceramic or

Ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

Copper

■ Heats very quickly and evenly.

Earthenware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

Porcelain

enamel-on-

steel or cast

iron

■ See stainless steel or cast iron.

Stainless steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even

heating.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amana AGG222 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info