Bedienungsanleitung Amana NTW4650YQ (Seite 4 von 32) (Englisch, Französisch)

506801

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

LOAD SIZE

Select the setting most suitable for your load. Ex small

will add a low amount of water for smaller loads and

Large will add the most amount of water for large or bulky

loads. Items need to move freely. Tightly packing can lead

to poor cleaning performance, and may increase wrinkling

and tangling.

WASH TEMPERATURE

Temperature senses and maintains uniform water

temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric

and soils being washed. For best results and following

the garment label instructions, use the warmest wash

water safe for your fabric.

■ Warm and hot water will be cooler than what your

previous washer provided.

■ Even in a cold and cool water wash, some warm

water may be added to the washer to maintain

a minimum temperature.

FABRIC SOFTENER

This option can be added to most cycles and must be set

to YES if using fabric softener during a cycle. It ensures that

fabric softener is added at the correct time in the rinse for

even distribution.

WASH CYCLE KNOB

Use the Wash Cycle knob to select cycles on your washer.

Knob does not advance during the progress of the cycle,

see cycle status lights for each stage of the process. See

“Cycle Guide” for detailed descriptions of cycles.

START/PAUSE/UNLOCK LID BUTTON

Press to start the selected cycle; press again to pause

the cycle and unlock the lid.

NOTE: If the washer is spinning, it may take several

minutes to unlock the lid. Press and hold for 3 seconds

to cancel a cycle.

CYCLE STATUS LIGHTS

The Cycle Status Lights show the progress of a cycle. At

each stage of the process, you may notice sounds or pauses

that are different from traditional washers.

FILL

When the START/Pause/Unlock Lid button is pressed,

the washer will ll to the selected water level. If the lid is

closed when the machine is done lling the lid will lock

and the machine will begin operation.

If the lid is open when the water stops entering the

machine, the cycle will not begin until the lid has been

closed and the START/Pause/Unlock Lid button is

pressed. If the cycle has not been started within

10 minutes of the water lling the washer, the washer

will pump out the water.

NOTE: Avoid opening lid during sensing phase. The

sensing process will start over when the washer is

restarted. The sensing light may also come on during the

Soak and Wash portions of the cycle. This is normal. To

restart the washer after the lid has been opened press

start.

WASH

You will hear the agitator moving the load. The motor

sounds may change at different stages in the cycle. The

wash time is determined by the selected soil level.

RINSE

You will hear sounds similar to the wash cycle as the

washer rinses and moves the load. You may hear the

motor turning on briey (short hum) to move the basket

while lling. Fabric softener will be added if the Fabric

Softener knob was set to YES.

Some cycles use spray rinsing. After draining and

spinning out wash water, the washer will continue to

spin and spray in rinse water for the entire rinse time.

SPIN

The washer spins the load at increasing speeds for

proper water removal, based on the selected cycle

and spin speed.

CYCLE COMPLETE

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

LID LOCKED

To allow for higher spin speeds, the lid

will lock and the Lid Locked light will

turn on. When this light is on, the lid is

locked and cannot be opened. When

this light is blinking, the washer is

paused. When this light is off, the lid

can be opened.

If you need to open the lid, press

START/Pause/Unlock Lid. The lid will

unlock once the washer movement has

stopped. This may take several minutes

if the load was spinning at high speed.

Press START/Pause/Unlock Lid again to

resume the cycle.

CONTROL PANEL & FEATURES

Not all features and options are available on all models.

Appearance may vary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amana NTW4650YQ Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info