806231
15
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
19
Use
Only seal fi lm
1. If necessary, press the release buttons 9 at the same time and
ip open the lid fl ap 2.
2. Position an open side of the lm above the heating element 15 ,
as shown in Fig. C.
As vacuum-sealing will not occur, the end of the lm does
not need to be positioned as far as the fi lm limit stops 11 . It
is suffi cient for the lm to be positioned approx. 1 cm over the
heating element.
3. Flip open the lid ap 2. In doing so, ensure that the fi lm does
not have any folds on the heating element.
4. Press down the lid ap on both sides and at the same time on
the points marked with the hand symbol until both locking
mechanisms audibly lock in.
5. Connect the power plug to the power supply.
6. Press the Seal sealing button 3.
The indicator lamp of the button lights up red during the
sealing process, then it ashes 3 x after the process and sub-
sequently goes out. With this, the sealing process is completed.
With the Stop button 6, the sealing process can also be ended
early.
7. Unlock the release buttons 9 by pressing the lid ap on both
sides and at the same time.
8. Flip open lid fl ap 2.
CAUTION!
Burn hazard!
Hot surface!
The heating element and the pressing bar are
very hot after the sealing process.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ambiano GT-VBS-01 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ambiano GT-VBS-01

Ambiano GT-VBS-01 Bedienungsanleitung - Deutsch - 22 seiten

Ambiano GT-VBS-01 Bedienungsanleitung - Französisch, Italienisch - 70 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info