Bedienungsanleitung Ambrogio L250i Elite S plus (Seite 30 von 42) (Englisch)

733760

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

User’s manual

INITIAL START UP – AUTOMATIC MODE

The automatic cycle is started during the initial start-up or after a period of inactivity.

1. Check that the height of the lawn surface to mow is compatible with the proper functioning of the robot (see “Technical

Specications”).

2. Adjust the cutting height as desired (see “Adjustment of Cutting Height).

3. Check that the work area has been correctly marked and that there are no impediments to the regular functioning of the robot

as indicated in the section “Preparation and Marking the Boundaries of the Work Areas” and following sections.

4. Position the robot inside the charging station.

5. Press the "ON/OFF" button and wait a few seconds for the robot to turn on completely. Follow the instructions on the display

and enter the password if prompted.

6. If starting the robot for the rst time, it is necessary to program the settings. However, if starting the robot after a long period

of inactivity, check that the programmed functions correspond to the actual condition of the lawn to be mowed (e.g. addition

of a pool, plants, etc.) (See “Programming Mode”).

7. After a few seconds, the message “CHARGING” will appear on the display.

8. The robot starts to mow the lawn according to the modes programmed.

9. Check there are no large puddles after a heavy rain, otherwise the area must be put in order or make sure the robot is in

"Pause".

ROBOT SAFETY STOP

During use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the “STOP” key. In case

of danger or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade

from accidently starting. First press the “STOP” button and then the "ON/OFF " button. Disconnect the power plug from the

electrical outlet.

Important

The robot safety stop is necessary during

maintenance and repairs (for example, blade

replacement, cleaning operations, etc.).

To start, proceed as indicated:

position the robot inside the cutting area;

press the "ON/OFF" button to turn on the robot and run the

start-up procedure again.

If the robot is started up outside of the cutting area, the blade

motor will not start and after briey searching for the signal, the

robot will show "OUT OF BORDER" on the display. Press "ON/

OFF", position the robot inside the cutting area and carry out the

start up procedure again.

ON/OFF

STOP

.....................................

......................

10:30

AUTOMATIC RETURN TO THE CHARGING STATION

The robot stops the work cycle if the following conditions are veried:

End of working time: at the end of the working time, the robot automatically returns to the charging station and starts

operating again according to what has been programmed (see “Programming Mode”).

Rain: with the function active, the robot returns to the recharging station automatically and will start working again as

programmed (see "Programming mode").

Battery to be charged: the robot automatically returns to the charging station.

Eco Mode: if the sensor detects that the lawn has already been mowed, it automatically returns to the charging station and

starts operating again according to what has been programmed (see “Programming Mode”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ambrogio L250i Elite S plus Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ambrogio L250i Elite S plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info