Bedienungsanleitung Ambrogio L85 (Seite 29 von 42) (Englisch)

733755

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

User’s manual

Important

To set or change the password, it is rst necessary to enter the previous one and then enter the new one.

Upon purchase, the password entered by the manufacturer consists of four numbers (0000).

Important

When entering the password, you will be prompted to re-enter the password in order to ensure that it has been

set correctly. In order to not forget the password, choose a number combination that is easy to remember.

START PASSWORD: this function allows dening whether you want to enter a password each time the robot is turned on after

a period of inactivity (e.g. winter storage).

No: there is no need to enter a password each time the robot is turned on. The robot requires the password to conrm this

parameter.

Yes: the password will be required each time the robot is started.

OPERATING MODE – PROGRAMMING MODE

Function for setting the operating mode of the robot. The robot automatically returns to “AUTOMATIC” mode when turned off.

•

Automatic: normal operating mode. The robot recognises the perimeter wire and returns to the charging station whenever

necessary.

•

Closed area: operating mode in closed areas with no charging station. For the correct use of this mode, refer to “USE OF

ROBOT IN CLOSED AREAS WITH NO CHARGING STATION.”

LANGUAGE OPTIONS – PROGRAMMING MODE

LANGUAGE: function for selecting the language to use for the messages and user menu. Scroll through the various options with

the “+” or “-” key and conrm with “ENTER”.

•

DATE FORMAT

•

TIME FORMAT

•

DISTANCE FORMAT

These functions allow personalising the date, time and distance formats.

INITIAL START UP – AUTOMATIC MODE

The automatic cycle is started during the initial start-up or after a period of inactivity.

1. Check that the height of the lawn surface to mow is compatible with the proper functioning of the robot (see “Technical

Specications”).

2. Adjust the cutting height as desired (see “Adjustment of Cutting Height).

3. Check that the work area has been correctly marked and that there are no impediments to the regular functioning of the robot

as indicated in the section “Preparation and Marking the Boundaries of the Work Areas” and following sections.

4. Position the robot inside the charging station.

5. Press the ON key and wait a few seconds for the robot to turn on completely. Enter the password (if prompted) (See

“Password Entry”). Press “Enter” if the information messages remain on the display.

6. If starting the robot for the rst time, it is necessary to program the settings. However, if starting the robot after a long period

of inactivity, check that the programmed functions correspond to the actual condition of the lawn to be mowed (e.g. addition

of a pool, plants, etc.) (See “Programming Mode”).

7. After a few seconds, the message “CHARGING” will appear on the display.

8. The robot starts to mow the lawn according to the modes programmed.

9. Check there are no large puddles after a heavy rain, otherwise the area must be put in order or make sure the robot is in

"Pause".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ambrogio L85 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ambrogio L85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info