Bedienungsanleitung American Audio Q-2422 PRO (Seite 7 von 22) (Englisch)

603204

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

©American Audio® - www.AmericanAudio.com - Q-2422 PRO User Instructions page 7

QUICK START: American Audio® would like to thank you for your purchase of this great audio prod-

uct. For those of you that don't have the time to read the entire user manual we have compiled these

quick start instructions. We hope that you will at least read through these instructions to familiarize

yourself with the basics of this mixer. The Q-2422 PRO is part of American Audio’s continuing evolu-

tion in audio technology. This unit has been built and designed to meet the needs of a typical DJ. We

have attempted to provide you with the most reliable product on the market by using only components

constructed of the ﬁnest material.

MASTER LEVEL - Use this level to control your main volume output. Try never to send an output of

more than +4dB to your system. Signal at levels higher than this will start to distort and may cause

damage to your system and speakers. Remember that a distorted signal from you mixer will only be

multiplied throughout your system.

CHANNEL GAIN LEVEL - The channel gain levels are not to be used as volume controls. Never use

the channel trim to set the output volume. These controls are used to aid in distortion control. Use

these control to preset your signal level before the crossfader. With your channel faders in the maxi-

mum position, use the channel trim level to set an average output level of about +4dB on your master

level meter.

HEADPHONES - To avoid damaging your headphones always be sure the headphone volume level

(16) is set to minimum before plugging them in. To avoid sever hearing damage, never put the head-

phone on without making sure the headphone level is turned down.

MAIN MIC - The main mic connector uses a combo plug that allows you to connect either a 1/4”

unbalanced jack or by a standard 3-pin XLR balanced connector. The main mic also has an indepen-

dent volume control. When feedback occurs when using the mic, try lowering the level this may reduce

the feedback. Always leave the mic level to it’s minimum level when not in use. Note: We recommend

that you use a 500-600ohm microphone for the best sound quality.

PHONO/AUX LINE LEVEL SELECTOR SWITCH - This switch is used to change the selected input

from phono to line and vice versa. The switch selectors are on the rear panel.

Q-2422 PRO QUICK START INSTRUCTIONS

Q-2422 PRO UNPACKING

Every Q-2422 PRO has been thoroughly tested and has been shipped in perfect operating condition.

Carefully check the shipping carton for damage that may have occurred during shipping. If the carton

appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment neces-

sary to operate the mixer has arrived intact. In the event damage has been found or parts are missing,

please contact our toll free customer support number for further instructions. Please do not return the

mixer to your dealer without ﬁrst contacting American Audio® customer support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

American Audio Q-2422 PRO Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von American Audio Q-2422 PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info