Bedienungsanleitung American Audio Q-D6 (Seite 6 von 17) (Englisch)

603203

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

American Audio would like to thank for your purchase of this great product. For those of you that are to

impatient to read the entire user manual we have compiled these quick start instructions. We hope that

you will at least read through these instructions to familiarize yourself with the basic understanding of

the unit. The Q-D6 is part of American Audio’s continuing evolution in audio technology. This unit has

been built and designed with the typical DJ in mind, by DJ’s. We have attempted to provide you with

the most reliable product on the market by using only components made from quality products.

MASTER LEVEL - Use this level control to set your volume output. Try never to send an output of

more than +4dB to your system. Signal at levels higher than this will start to distort and may cause

damage to your system and speakers. Remember that a distorted signal from you mixer will only be

multiplied throughout your system.

CHANNEL GAIN LEVEL - The channel trim levels are not to be used as volume controls, never use the

channel gain to set the output volume. These controls are used to aid in distortion control. Use these

control to preset your signal level before the crossfader. With your channel faders in the maximum

position, use the channel trim level to set an average output level of about +4dB on you master level

meter.

HEADPHONES - To avoid sever hearing damage, always be sure the headphone level is set to mini-

mum before plugging them in. Never put the headphone on without making sure the headphone level

is turned down.

MIC - The mic connector uses a 1/4” jack unbalanced connector. The DJ mic has an independent

volume control. When feedback occurs when using the mic, try lowering the “low” level this may

reduce the feedback. Always leave the mic level to it’s minimum level when not in use.

Q-START FEATURE - This function works in conjunction with a compatible American Audio or Ameri-

can DJ “Q”Start CD player. When used with a compatible CD player, you can use the crossfader to

start and stop the CD Player with the slide of the fader. The ON/OFF “Q ”START switch activates this

FADER “Q ”START feature.

Q-D6™ Quick start instructions

Q-D6™ Unpacking

Every Q-D6™ has been thoroughly tested and has been shipped in perfect operating condition. Care-

fully check the shipping carton for damage that may have occurred during shipping. If the carton

appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment nec-

essary to operate the mixer has arrived intact. In case damage has been found or parts are missing,

please contact our toll free customer support number for further instructions, please do not return the

mixer to your dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

American Audio Q-D6 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von American Audio Q-D6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info