Bedienungsanleitung Amica EB 1020 TZTPR (Seite 18 von 80) (Englisch, Holländisch)

609225

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

OPERATION

Light

The sensor operates independently and

using it does not affect other functions and

settings. sensor is inactive in a standby

mode.

The light in the oven turns on:

- when you touch —for30seconds;

- when you touch and hold for 3s – until

the appliance enters standby mode,

when you use any heating function or a pre-

setprogramme—for30s;

when"fastheat-up"completes—for30s;

whenyouopenthedoor—untilthedooris

closed, but no longer than for 10 minutes.

Touch to turn off the light at any time.

Cooling fan.

Cooling fan operates independently of the

set functions and the appliance status.

Cooling fan turns on when the oven cham-

ber temperature exceeds 50°C and turns off

when it is below this temperature.

Thermostat

Thermostat symbol (next to the oven tem-

perature) indicates the operating status of

heaters. If any of the heating elements oper-

ates, the symbol lights up. The symbol

goes out, if none of the heating elements

operates (e.g. when the oven reaches the

desired temperature and the heating ele-

ments are disconnected until the tempera-

ture drops).

Heating functions

Touch to select heating functions. You

can use the following controls:

– open pre-set programmes menu (clear

unconrmedsettings);

 – open timer menu (clear unconrmed

settings);

– go back. If you are on the main screen

– clear settings and enter operating mode.

, – navigate the menu;

OK–conrm.

[donothingfor20s]-ifyoudonothingfor20

seconds, settings are cleared and the appli-

ance enters operating mode.

The text display (left) shows the message

"Select heating function >" and ">" is blink-

ing. Heating functions are displayed se-

quentially.ThedefaultfunctionisFancook-

ing. Note: Rotisserie functions only appear

on appliances that feature rotisserie. Out of

the three cleaning function available only

the active function is displayed, depending

on the pyrolysis settings.

In addition to accompanying functions, dif-

ferent oven chamber outline symbols are

displayed reecting the selected heating

function. Touch or to select and then

OKtoconrm.

Once your selection is made, it is displayed

on the left side while the right side is blank.

The default oven temperature ashes.

Touch or  to adjust temperature and

thenOKtoconrm.

If meat probe is detected, the appliance will

ask you to select its temperature. Touch

or toadjustdefaultmeatprobetempera-

tureof80°CandthenOKtoconrm.

This step is omitted if no meat probe is de-

tected.

Oven light is on switches, and you can use

and sensors. Other functions start af

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica EB 1020 TZTPR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Amica EB 1020 TZTPR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info