Bedienungsanleitung Amica EB 1020 TZTPR (Seite 22 von 80) (Englisch, Holländisch)

609225

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

OPERATION

ration). The symbolindicatorashesand

"0:00" is shown (or, if the function has been

previously activated, the remaining duration

until the oven turns off). Touch or to

adjustsettings.Touch or do nothing for 5s

to abort and keep previous settings or touch

toconrmDurationandstartcountdown.

The symbol is shown. The symbol

andEndTimeashfor5seconds,thenthe

symbol goes out and the display shows

current time.

You can independently set the timer and

heating functions. You can also change the

heating functions while timer is counting

down. The Timer continues to count down

regardless of whether any of the heating

function is activated. The fast heat-up func-

tion does not affect the timer either.

You can deactivate the timer by setting the

duration to 0:00.

Once duration has elapsed, you will hear an

[end]beep.Allheatingelementsarediscon-

nected. You can silence the alarm as fol-

lows:

- touch any sensor once to reset all function

settings, temperatures and to turn on light

for 30 seconds;

- touch twice to set the new duration and

continue cooking with currently set tempera-

ture and settings.

Automatic operation

You can set the appliance, so that its timed

operation is delayed and cooking ends at a

specictime.

YoumustrstsettheDuration(sameasin

timed operation). Touch  to conrm the

set Duration. The symbol lights up and

the  symbol starts ashing. The display

will show the End Time (calculated as Start

Time + Duration). Touch within 5 seconds

to move the End Time forward (and delay

Start Time). Touch or toadjust.Touch

, or do nothing for 5 seconds to abort or

touchOKtoconrm.OnceEndTimeiscon-

rmedthe and symbols light up stead-

ily and the Current Time is shown again.

The and indicators are on during the

countdown to Start Time. Once the count-

down is complete, the symbol goes off

and the appliance turns on heating for the

set Duration.

Touch to view and modify the set dura-

tion.Touch the sensor once to set the Kitch-

en Timer, touch it again to set Duration and

touch it the third time to set the End Time

Set Duration to 0:00 to erase both Duration

and End Time.

YoucanadjustEndTimefrom(CurrentTime

+ Duration + 1 minute) to (Current Time +

Duration + 10 hours). You can modify Du-

ration (when End Time is set) from 0:00 to

(Duration – Current Time – 1 minute).

Duration countdown

The appliance counts down duration. Cur-

rent Duration is shown on the bottom line

and accompanied by the [duration symbol

].Thedurationisclearedwhentheappli-

ance is in standby.

During timed operation (pre-set pro-

grammes or timer) the time remaining to

the next stage is shown (no symbol) i.e.

the time remaining to Start Time and to End

Time. Touch and hold for 3 seconds to

view elapsed time. Touch and hold for 3 sec-

onds again to view remaining time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica EB 1020 TZTPR Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Amica EB 1020 TZTPR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info