Bedienungsanleitung Amica EGSP 14069 V (Seite 21 von 32) (Englisch)

540017

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

CLEANING AND MAINTENANCE

Regular dishwasher cleaning can extend its life-

time of trouble-free operation.

Grease and limescale can accumulate in dish-

washer chamber. In the event of such accumula-

tion

- Add detergent and do not load any dishes. Select

a high temperature washing programme and start

the dishwasher. If the result is not satisfactory, use

a special cleaner available on the market. (Clean-

ers manufactured specically for dishwashers).

Clean the dishwasher door seal

To remove any accumulated residue from the door

seals, wipe the seals regularly with a damp cloth.

Clean the dishwasher

Clean the spray arms and lters at least once a

week. Before cleaning unplug the dishwasher from

wall outlet and close the water supply valve. Do

not use harsh or abrasive materials when clean-

ing. Wash with a mild cleaning agent and a damp

cloth.

Filters

The lter prevents larger remnants of food or other

objects from getting inside the pum.

The residues may block the lter, in this case they

must be removed.

The lter system consists of a

coarse lter,a at (Main lter)

And a microlter(Fine lter).

Main lter 1

Food and soil particles

trapped in this lter are pulver-

ized by a special jet on the

lower spray arm and washed

down to drain.

Coarse lte 2

Larger items, such as pieces of bones or glass,

that could block the drain are trapped in the coarse

lter. To remove the items caught by the lter,

gently squeeze the tap on the top of this lter and

lift out.

Fine lter 3

Larger items, such as pieces of bones or glass,

that could block the drain are trapped in the coarse

lter. To remove the items caught by the lter,

gently squeeze the tap on the top of this lter and

lift out.

Step 1: Turn the lter in anti-clockwise

direction, then lift it up.

Step 2: lift the Main lter up

Step 3: lift the Fine lter up

Spray arms

It is necessary to clean the spray arms regularly

for hard water chemicals will clog the spray arm

jets and bearings. To remove the spray arms,

screw off the nut clockwise to take out the washer

on top of the spray arm and remove the arm.

Wash the arms in soapy and warm water and use

a soft brush to clean the jets. Replace them after

rinsing them thoroughly.

Water supply hose lter

The water is ltered by the lter in the water supply

line to avoid damage to the appliance due to impu-

rities (such as sand, clay, rust, etc.) that occasion-

ally occur in water. This will also prevent accumu-

lation of sediment after dishwashing. Periodically

inspect the lter and hose and clean if necessary.

To clear the lter, close the water supply valve,

then remove the hose. Remove the lter from the

hose and clean it under running water. Replace

the clean lter inside the hose. Install the hose.

Cleaning the door lock

After each use wipe the door lock and around with

a cloth soaked with mild detergent and wipe dry.

Do not ood the lock with water. Do not use any

aerosol cleaners. They may damage the lock and

electric components inside.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica EGSP 14069 V Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Amica EGSP 14069 V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info