Bedienungsanleitung Amica EHEG 934 111-1 E (Seite 14 von 84) (Englisch, Holländisch)

721555

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Gas connection

Caution!

The cooker should be connected to a

gas supply of the particular type of gas

that the appliance is manufactured to

function with. Information about the

type of gas that the cooker has been

adapted to by the factory is shown on

the data plate. The cooker should be

connected exclusively by an appropri-

ately authorised tter and only he or

she has the right to adapt the cooker

to a dierent type of gas.

INSTALLATION

Fitting guidelines

A tter should:

 have a gas tter’s authorisation,

 be acquainted with the information in-

cluded on the data plate of the cooker

about the type of gas to which the cooker

is adapted; the information should be

compared with gas supply conditions at

the place of installation,

 check:

- airing eciency, that is eciency of air

exchange in the rooms,

- tightness of gas tting connections,

- eectiveness of all functional elements of

the cooker,

- if the electricity supply is adapted to func-

tion with a safety ground lead (zero).

 provide the user with a connection cer-

ticate and give him or her instructions

in cooker use.

Connection with a exible steel hose.

If the cooker is connected according to the

class 2 specications, sub-class I, only ex-

ible metal hose can be used which meet the

valid national regulations. Gas feeding con-

nector must be G ½” threaded coupling.

Use only pipes and ttings that meet the

requirements of the valid standards. Maxi-

mum admissible length of the exible hose

is 2000 mm.

Make sure the connection is not touching

any mobile elements which could damage

the hose.

Connection with a stable pipework.

The cooker comes with a G ½” threaded

coupling.

The connection to gas supply must be done in

a manner that excludes stresses in any point

of the pipework or parts of the appliance.

Make sure you do not exceed the torque

when making the connection (maximum

torque is 20 Nm). Otherwise, the connection

may be faulty or leaks may occur.

The gas hose should not touch metal ele-

ments of the cooker back shield.

Caution!

The cooker may only be connected

to a liquid gas cylinder or the existing

gas supply by an authorised tter,

observing all safety rules.

Caution!

On completion of the cooker installa-

tion, the tightness of all connections

should be checked, e.g. applying

water with soap.

Do not use re to check tightness.

Important!

Each time you replace a reducer

carry out technical inspection of the

cooker that covers gas valves and

proper operation of the ame failure

cut-o device.

The gas connection can be located on the

right or left side of the appliance. Gas sup-

ply valve on the gas connection must be

easily accessible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica EHEG 934 111-1 E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Amica EHEG 934 111-1 E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info