Bedienungsanleitung Amica FK3213DF (Seite 13 von 24) (Englisch)

794933

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

OPERATION AND FUNCTIONS

START

Testing

1. Clean the parts of the refrigerator with lukewarm

water containing a little neutral detergent and with

clear water, and wipe them dry.

Notes: Electric parts of the refrigerator can only be

wiped by dry cloth.

2. Turn on electricity. The compressor begin to

work.

3. Open the door 30 minutes later, if the tempe-

rature in the refrigerator decreased obviously, it

shows that the refrigerator system works well.

When the refrigerator operates for a period of time,

the temperature controller will automatically set the

temperature within limits it opens.

The display is located in the middle of the refrige-

rator door. Please refer to the below gure for the

layout.

introduction of the buttons

1 Fridge: to set the refrigerator temperature

2 Freezer: to set the freezer temperature

3 Function: to choose functions of fast cooling, fast

freezing, SmartECO and vacation

4 OK: to enter or to quit the existing function

Function setting

Appliance connected to power at the rst time

When the appliance is connected to power at

the rst time, the display will be lit for 2 seconds

before going normal and the appliance runs with

SmartECO function.

Display control

When the refrigerator door is closed and there is

no button operation in 3 minutes, the display light

goes off.

When the display light is off, open the refrigerator

door or click any button to light it up.

Temperature setting

1) Click the “refrigerator” or “freezer” button and

when it ickers in the symbol, temperatures can

be set; each time when the button is clicked, the

temperature changes accordingly (the display

shows the temperature accordingly). (Temperatu-

res cannot be set under functions of fast cooling,

fast freezing, SmartECO and vacation,)

2) Under temperature setting, if there is no button

operation in 5 seconds, the button stops ickering

and the set temperature comes into effect.

3)Temperature cycle

Refrigerator: 2OC→ 3OC→ 4OC→5O C→ 6OC→

7OC→ 8OC→ OFF→ 2OC

Freezer: -24OC→ -23OC→ -22OC→ -21OC→

-20OC→ -19OC→ -18OC→ -17OC→ -16OC→ -24OC

SmartECO

Under SmartECO, it is 4OC in the refrigerator and

-18OC in the freezer.

Temperatures cannot be changed and you can

click the temperature zone button to check the

temperature.

1) To enter SmartECO

Click “option” until it ickers and then click “OK” to

enter this function.

2) To quit SmartECO

Under SmartECO, click “option” until it goes to

SmartECO, click “OK” to quit this function and the

light goes off.

Temperatures of each chamber go back to the

value before SmartECO function.

Control panel (Fig. 10). Fast cooling

Under fast cooling, it is 2OC in the refrigerator and

the refrigerator temperature cannot be changed.

1)To enter fast cooling

Click “option” until it ickers in “fast cooling” and

then click “OK” to enter this function.

2) To quit fast cooling

Under fast cooling, click “option” until it goes

to “fast cooling” and then click “OK” to quit this

function.

The light in fast cooling goes off and the refrigera-

tor temperature goes back to the value before fast

cooling.

Fast freezing

Under fast freezing, refrigerator temperature can

be set but not for the freezer temperature.

1) To enter fast freezing

Click “option” until it ickers in “fast freezing” and

then click “OK” to enter this function.

2) To quit fast cooling

Under fast freezing, click “option” until it goes

to “fast freezing” and then click “OK” to quit this

function.

The light in fast freezing goes off and the freezer

temperature goes back to the value before fast

freezing.

When fast freezing time is up (26 hours), it quits

automatically.

When it goes to SmartECO, fast freezing stops.

Vacation

Under vacation, it is 14OC in the refrigerator and

the temperatures in this chamber cannot be

changed.

1) To enter vacation

Click “option” until it ickers in “fast freezing” and

then click “OK” to enter this function.

2) To quite vacation

Under vacation, click “option” until it goes to “vaca-

tion” and then click “OK” to quit this function.

The light in vacation goes off and the refrigera-

tor temperature goes back to the value before

vacation.

Vacation quits under functions of SmartECO and

fast cooling.

Power off memory

With this design, the refrigerator can automatically

keep all the setting in case of power off. When the

unit is plugged in again, the refrigerator will run

with the setting before power off.

Power-On Delay

To prevent harm to the refrigerator in case of

sudden power cut and power on, the unit does not

start immediately if the power off time is less than

5 minutes.

Freezer over-temperature alarm (only in case of

power on)

When the freezer temperature is higher than 10OC

at the rst time connected to power, the symbol

light of the freezer chamber goes on and the num-

ber representing temperature ickers.

Press any button or wait for 5 seconds, ickering

stops and it goes back to the temperature that was

set.

Refrigerator door opening alarm

When the refrigerator is open over 3 minutes, the

buzzer will buzz. Close the door or press any but-

ton to stop the alarm, but for the latter, the alarm

will go off again after 3 minutes.

Sensor fault alarm

When it shows “E0”, “E1”, “E2” or other abnormal

symbols, it means sensor faults and the refrigera-

tor needs repair.

Amica FK3213DF Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info