Bedienungsanleitung Amica UM1303 (Seite 21 von 24) (Englisch)

795055

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

6. Remove the two screws, which attach the lower hinge to the appliance door (Fig. 5). Take special care

and hold the appliance door with the other hand.

7. Holding the door, swing the lower door hinge away from the door using the other hand, then detach

the door from the appliance body (Fig. 6).

8. Remove the two screws , which attach the upper hinge to the body and the two screws holding the

lower hinge to the appliance body (Fig. 7).

9. Screw the upper and lower hinge on the opposite side of the appliance body using suitable screws

(Fig. 8). Upper hinge should be mounted on the other side of the appliance as the lower hinge. The

lower hinge should be mounted on the other side of the appliance as the upper hinge.

With the hinges open, hold the door parallel to the appliance body and screw the hinges to the door

using suitable screws while taking proper care.

10. Make sure that the door is properly aligned with the appliance body (Fig. 9).

INSTALLATION OF THE APPLIANCE

Installation of the appliance should be performed by a qualied installer. The appliance should be placed in

furniture case (Fig. 10). Once the appliance is placed correctly, adjust the height of the appliance by turning

the 4 adjustable feet as appropriate. If necessary, adjacent Amica appliances should be braced with a bracket

xed by screws and tted in furniture (Fig. 11). There is a special strip at the top of the appliance. Attach it to

the underside of the cabinet with appropriate screws supplied with the assembly kit (Fig. 16). Decorative strip

must not block the vents located in the bottom casing unit, the strip must be cut to size (Fig. 17). The depth of

the bottom casing unit can be adjusted by moving it forwards or backwards. Once properly adjusted, tighten the

mounting screws (located in the openings on both sides of the casing unit) with a cross-head screwdriver. This

will permanently attach the casing unit (Fig. 18).

FITTING FURNITURE BOARD TO APPLIANCE DOOR

Place the mounting bracket on furniture board and position it accordingly (Fig. 12). The distance between the

furniture board and the underside of the worktop should be 5 mm (Fig. 13). Attach the mounting bracket using

suitable screws supplied in the installation kit. Pull out the mounting bracket cover and screw in the two special

screws (2) in the appliance doors(Fig. 14). Attach furniture board with the xed mounting bracket to the appliance

door. Secure the furniture board with suitable nuts (item 3, Figure 14). Make sure the furniture board assembly

is positioned correctly relative to the appliance (Fig. 15). Using the supplied screws, attach the furniture board

assembly to the bottom of the appliance door (Fig. 15). Replace the mounting bracket cover in its original location.

1. Unplug the appliance before reversing the door opening direction.

2. Remove food from the appliance.

3. Remove caps on the front of the refrigerator body (Fig. 1, Fig 2).

4. Remove the two screws, which attach the upper hinge to the appliance door (Fig. 3). Take special

care and hold the appliance door vertically.

5. Holding the door, swing the upper door hinge away from the door using the other hand (Fig. 4).

Be especially careful during this step, as the hinge may close and cause injury.

CHANGING THE DIRECTION OF THE DOOR OPENING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica UM1303 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info