Bedienungsanleitung Amica ZIM466E (Seite 21 von 32) (Englisch)

794726

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

CLEANING AND MAINTENANCE

Regular dishwasher cleaning can extend its life-

time of trouble-free operation.

Grease and limescale can accumulate in dish-

washer chamber. In the event of such accumula-

tion

- Add detergent and do not load any dishes. Select

a high temperature washing programme and start

the dishwasher. If the result is not satisfactory, use

a special cleaner available on the market. (Clean-

ers manufactured specically for dishwashers).

Clean the dishwasher door seal

To remove any accumulated residue from the door

seals, wipe the seals regularly with a damp cloth.

Clean the dishwasher

Clean the spray arms and lters at least once a

week. Before cleaning unplug the dishwasher from

wall outlet and close the water supply valve. Do

not use harsh or abrasive materials when clean-

ing. Wash with a mild cleaning agent and a damp

cloth.

Filters

Check if food residue has accumulated on the

strainer and ne lter. If so, remove the lters and

clean them thoroughly under running water.

1. Main lter

2. Strainer

3. Fine lter

1. Remove the lower basket.

2. Turn the strainer counter-clockwise and pull it

up.

3. Remove the lter assembly.

4. Remove the ne lter from the strainer

5. Thoroughly clean the lters under running

water. Use a brush if necessary.

6. Install the lters in reverse order.

7. Insert the lter assembly into the chamber and

then turn clockwise.

• Never use the dishwasher without the

lter assembly.

• Improper mounting of the lters reduces

the dishwashing effectiveness.

• Clean lters are key to correct dishwash-

er operation.

Spray arms

Make sure that jet nozzles the upper and lower

spray arm are not clogged. If jet nozzles are

clogged, remove the spray arms and clean them

under running water.

Remove the lower spray arm by pulling it upwards,

while the upper arm is removed by turning the nut

counter-clockwise.

When mounting the spray arm make sure that the

nut is well tightened.

Water supply hose lter

The water is ltered by the lter in the water supply

line to avoid damage to the appliance due to impu-

rities (such as sand, clay, rust, etc.) that occasion-

ally occur in water. This will also prevent accumu-

lation of sediment after dishwashing. Periodically

inspect the lter and hose and clean if necessary.

To clear the lter, close the water supply valve,

then remove the hose. Remove the lter from the

hose and clean it under running water. Replace

the clean lter inside the hose. Install the hose.

Cleaning the door lock

After each use wipe the door lock and around with

a cloth soaked with mild detergent and wipe dry.

Do not ood the lock with water. Do not use any

aerosol cleaners. They may damage the lock and

electric components inside.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica ZIM466E Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info