Bedienungsanleitung Amica ZIV635 (Seite 18 von 36) (Englisch)

794730

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

• When the conditions of use of such products and the machine settings are appropriate,

they ensure savings in salt and/or rinse aid consumption.

• Contact the detergent manufacturers if you are not obtaining good wash results (if your

dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of

warranty for your machine does not cover any complaints caused by the use of these types

of detergents.

: If you want to obtain better results while using combined detergents,

add salt and rinse aid into your machine and adjust the water hardness setting and the rinse

aid setting to the lowest position.

Solubility of the tablet detergents produced by different companies can vary

depending on the temperature and time. Therefore, it is not recommended to use such

detergents in short programs. It is more suitable to use powder detergents in such

programs.

Should any problem, which you have not encountered before, arise with the use of

this type of detergents, contact the detergent manufacturers directly.

• Fill the salt and rinse aid compartments.

• Adjust the water hardness setting to the highest position(6)andrunanempty-wash.

• Adjust the water hardness level.

• Make the suitable rinse aid setting.

Rinse aid is used to prevent the stay of white water drops, lime

stains, white film strip-shaped stains that may form on the

dishes, as well as to increase the drying performance. Contrary

to the popular beliefs, it is used not only for obtaining shinier

dishes but also for obtaining sufficiently dried dishes. For this

reason, care should be taken that there is adequate amount of

rinse aid in the rinse aid compartment and only polishing material

produced for use at dishwashers should be used.

If the rinse aid lamp on the control panel becomes on fill the rinse

aid compartment with rinse.

To put rinse aid, remove the rinse aid

compartment cap by turning it.1 Fill

the rinse aid compartment with rinse

aid until the rinse aid level indicator

becomes dark; 2 refit the cap and

close it by turning it in a way that the

nails will correspond to one another.

By checking the rinse aid level

indicator on the detergent dispenser,

you can understand whether or not

your machine needs rinse aid. A dark

indicator b means that there is rinse aid in the compartment,

while a light indicator a shows that you need to fill the compartment with rinse aid.

The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse

aid is the position 3. You need to increase the degree of the adjuster if water stains form on

your dishes after a wash, whereas you need to decrease the degree if a blue stain is left when

wiped by hand. 3

Use only those rinse aid materials which are allowed for use in the machine. As

rinse aid residues left as a result of overflowing will create extremely high amounts of foam

and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it

with a rag

Recommended usage

Warning:

When you give up using combined detergents

Filling with rinse aid and making the setting

Warning:

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amica ZIV635 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info