Bedienungsanleitung Ampeg SVT-4 Pro (Seite 4 von 20) (Englisch)

541772

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

SVT-4 PRO Bass Guitar Amplifier

Introduction

Congratulations!

You are now the proud owner of an Ampeg SVT-4 PRO bass

guitar amplifier. This versatile and powerful bass amplifier delivers up to 1600 watts of

unsurpassed quality, offering the classic vibrance of tubes, as well as contemporary features.

The SVT-4 PRO amplifier is an ideal companion to the Classic Series, Pro Series, or

PF cabinets, available separately.

Like all Ampeg products, your SVT-4 PRO amplifier is designed by musicians and built

using only the best of components. Each amplifier is tested to confirm that it meets our

specifications, and we believe that this amplifier is the absolute best that it can be. In order to

get the most out of your new amplifier, please read this manual before you begin playing.

Best of luck in all of your musical endeavors!

Sincerely,

The dedicated team at Ampeg

Features

• DUAL SEPARATE POWER AMPLIFIERS: Operate in true stereo or mono bridged mode

for even greater output power [pages 5–6, 12].

• BI-AMP CAPABLE: Adjustable crossover frequency control and low-to-high frequency

balance control allow you to fine-tune the bi-amp abilities of the amplifier [pages 6–7, 10].

• 5-POSITION MIDRANGE SELECTOR: Take your pick from the five center frequency

points available to get just the right midrange voicing [page 9].

• COMPRESSION CONTROL: Allows you to control the dynamics of the tonal response

characteristics from the power amp, from punch to compressed [page 8].

• 9–BAND GRAPHIC EQ: Use as a “second channel” for bass solos, or to shape the

sound to your own exacting standards. An independent level control allows you to adjust

the Graphic EQ volume [page 10].

• TUNER OUT JACKS: Two jacks – one on the front panel, one on the rear panel – allows

connection to an electronic tuner and provides an “always live” monitor feed, even when

the output is muted [pages 8, 13].

• SPEAKON JACKS: For more reliable connections at higher outputs and for mono

bridged connections (in addition to 1/4" speaker out jacks) [page 11].

• TRANSFORMER BALANCED LINE OUTPUTS: Independent level control. Two trans-

former balanced XLR and two balanced/unbalanced 1/4" output jacks – switchable stereo

or mono (one “wet”, one “dry” signal), pre– or post–EQ [page 12].

• STEREO EFFECTS LOOP: Connect effects here for increased intensity and quieter

operation [page 13].

• POWER AMP IN AND PREAMP OUT: Two separate loops, one for each channel:

a separate preamp may be connected to the Power Amp In jack and the Preamp Out

jack may be connected to a slave amp [page 12].

• FOOTSWITCH CONTROL: Use a footswitch to bypass/activate the Effects Loop and to

activate the Graphic EQ and the Mute feature [page 12].

• CIRCUIT BREAKER PROTECTION: A heavy duty resettable circuit breaker provides

protection against fault conditions [page 11].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ampeg SVT-4 Pro Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info