Bedienungsanleitung Amplicomms TCL200 (Seite 8 von 15) (Englisch)

567781

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Preparing the Equipment

6. Press the button (6) or (7) as often as necessary until the

current minute is set. The alarm clock then announces the

minute currently set.

7. Press the button (8) briefly to conclude the setting procedure.

The alarm clock then announces the complete weekday and

time setting.

Setting the alarm time and period

There are two alarm period settings (1 and 2)

available. You can set one of three alarm periods

available for each setting. The alarm time you have set

is automatically repeated on the days

defined in the alarm period. Refer to Point 6 below.

The alarm switch (3) must be set to ON before the

alarm can be set.

1. Use the sliding switch (24) to select an alarm period (Alarm

period 1" or Alarm period 2") This basically relates to the

days on which the alarm time you have set is active (refer to

Point 6 below).

2. Press the button (9) for 5 seconds. The alarm clock

announces the set hour.

3. Press the button (6) or (7) as often as necessary until the

required hour is set. The alarm clock announces the hour set.

4. Press the button (9) briefly. The alarm clock then announces

the minute set.

5. Press the button (6) or (7) as often as necessary until the

required minute is set. The alarm clock then announces the

minute set.

6. Press the button (9) briefly. The alarm clock then announces

the alarm period currently set.

There are three different alarm periods available:

Monday to Friday (1 − − 5), Monday to Sunday (1 − − 7)

and Saturday + Sunday (6 − − 7).

7. Press the button (6) or (7) as often as necessary until the

required alarm period setting is set. The alarm clock then

announces the alarm period setting currently active.

8. Press the button (9) briefly to conclude the setting procedure.

The alarm clock then announces the complete weekday and

time setting.

Selecting the alarm type (mode)

Use the sliding switch (16) to select the type of alarm. There are

three settings available, from left to right vibration only",

acoustic signal only" or acoustic signal + vibration".

Setting the volume

Turn the rotary knob (13) to set the required volume. Firstly, set

the volume to quiet" (turn anticlockwise) and increase the

volume slowly.

Exposure to the alarm at full volume for a long period could

cause ear damage.

Setting the acoustic signal

Turn the rotary knob (14) to set the required acoustic signal.

Setting the pitch

Turn the rotary knob (15) to set the required pitch for the acoustic

signal.

Use the rotary knobs for volume and pitch to select

settings whereby the alarm can serve its purpose with the

volume setting as low as possible. Depending on your

hearing, it is possible that you can detect higher or lower

pitch tones even at low volumes.

0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Amplicomms TCL200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Amplicomms TCL200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info