Bedienungsanleitung Andrews Polar Wind Portable (Seite 2 von 2) (Englisch)

635917

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Operating Instructions - Polar Wind

Click www.andrews-sykes.com or Call Us Free 0800 211 611

Dehumidifying and Cooling Operations

1. The operating range for dehumidifying is 10°C-30ºC (50°F-86°F) and the

operating range for cooling operating is 17°C-30°C (63°F-86°F).

2. If the cooling or dehumidifying operations have been switched off and need

switching on again in a short time, allow approximately three minutes for the

cooling or dehumidifying operations to resume.

3. Make sure the water pump drain hose is correctly connected to the unit.

Cooling Operation

1. Operating temperature range: 17ºC-30°C (63°F-86°F)

2. Press the

button several times until the indicator light comes on.

3. Press the

buttons to select your desired room temperature.

4. Press the

button to choose the fan speed.

Dehumidifying Operation

1. Operating temperature range: 13°C-32°C (55°F-90°F)

2. Press the

button several times until the indicator light comes on.

3. The fan will run at a ﬁxed speed at this setting.

4. Keep windows and doors dosed for the best dehumidifying effect.

5. Do not put the duct to window.

Fan Operation

1. Press the button several times until the indicator light comes on.

2. Press the

button to choose the fan speed.

3. Do not put’the duct to window.

Timer Operation

1. Press the button when the air conditioner is off. Select the time you

need the unit to start to operate.

2. The Operation paned window will display “On”.

3. The starting time is adjustable from 00.00 to 24.

Setting the off timer:

1. Press the button when the air conditioner is on. Select the time you

need the unit to turn off. The Operation Panel Window will display “Off”.

2. The turning off time is adjustable from 0.00 to 24

Water Pump Drainage

Connect the water pump drain hose to the unit before operate. When the water

level of the internal water tank reaches a predetermined level, the water pump will

be activated and drain the condensed water outside through the connected drain

hose. (Under this condition, attach the rubber bung to the back hole to prevent

continuous drainage.) Fig. 4

Continuous Drainage

When you plan to leave this unit unused for a long time, remove the rubber bung

from the back hole and attach a section of the continuous drain hose connector.

All the water In the water tank will drain outside through the drain hose. (Under

this condition, the water pump is not activated). Fig. 5.

DIGITAL DISPLAY

FAN SPEED

Indication lights.

COOL/DRY/FAN indicator

Press this button will choose

high, middle or low speed of air

delivery.

TEMP SETTING buttons

This button sets the present time

and timer.

TIMER ON/OFF buttons

Program the timer on/off function

FAN SPEED button

Indication light.

WATER FULL

Indication light.

ON/OFF button

Pressing this button will turn the

machine on or off.

MODE button

Pressing this button will turn the

machine on or off.

POWER

Indication light.

INFRA RED RECEIVER

Fig.4

Filter

Drain

Water pump drain

Fig.5

Fig.1

Fig.3

Fig.2

Operating Controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Andrews Polar Wind Portable Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info