Bedienungsanleitung Angelcare AC315 (Seite 3 von 68) (Englisch, Französisch, Spanisch)

681986

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

26. DO NOT store this product, or the batteries provided with or identiﬁed for

use with this product, in high-temperature & high humidity environments and

avoid direct sunlight.

IMPORTANT SAFETY

INSTRUCTIONS

27. is monitor uses public airwaves to transmit signals. e Parent Unit may

pick up signals or interference from other nursery monitors in your area. Your

monitor may even be picked up by other households. To protect your privacy, make

sure both units are turned OFF when not in use. If you experience interference,

change the channel on both units.

28. Power cord protection - Protect the Sensor Pad, cord and Adapter’s

power cord from being walked on or pinched by furniture or other items

– Power supply cords should be routed so that they are not likely to be walked on

or pinched by items upon or against them, paying particular attention to cords and

plugs, convenience receptacle, and the point where they exit from the product. e

socket outlet shall be installed near the equipment and shall be easily accessible.

Make sure to plug the adapter to the socket outlet nearest to the equipment

and that is easily accessible. To disconnect from mains, unplug the adapter.

29. Only use attachments/accessories and replacement parts speciﬁed

by the manufacturer. Any mounting of the product should follow the

manufacturer’s instructions.

• DO NOT position this product on an unstable cart, stand, tripod, bracket

or table. e product may fall, causing serious injury to a child or adult and

serious damage to the product.

• Use ONLY with a cart, stand, tripod, bracket or table recommended by the

manufacturer or sold with the product.

• Be sure replacement parts are supplied by Angelcare and have the same

characteristics as original part. Unauthorised substitution may result in ﬁre,

electric shock or ﬁre.

30. Unplug this appliance during lightning storms or when not used

for long periods of time

31. Servicing - DO NOT attempt to service this product yourself as

opening or removing covers (except battery door) may expose you to

dangerous voltage or other hazards.

32. Power Supply – see Technical Speciﬁcation within this guide.

33. Overloading - DO NOT overload wall outlets, extension cords or

integral convenience receptacles as this can result in a risk of ﬁre or

electric shock.

34. Camera Unit Antenna - e antenna used for this transmitter must be

installed to provide a separation distance of at least 8’’ (20 cm) from all persons

and must not be collocated or operating in conjunction with any other antenna

or transmitter.

35. Cleaning - Disconnect all units before cleaning. DO NOT immerse in water

any part of the monitor. Clean only with dry cloth.

36. Sensor Pad –

• Vibration Source/interference - When the Sensor Pad is in use, DO

NOT use a crib mobile, other crib accessories that may produce vibrations.

Other sources of vibrations may include fans, washing machines, loud music,

etc. ese sources of vibration may interfere with the performance of your

Angelcare® monitor and the alarm will not sound if it continues to detect any

movement other than your baby’s. Be sure all vibration sources are eliminated

before using the monitor.

• If your crib does not have a solid, stationary, completely ﬂat, ﬁrm surface

including a spring or slat base, place a hard board between the crib base and

the Sensor Pad, to ensure correct operation. e hardboard support must

measure at least 33 x 33 cm (13” x 13”) and 6 mm (1/4”) thick. is hardboard

support must be larger than the Sensor Pad surface area.

• e Sensor Pad functions with any size and type of mattress except memory-

foam mattresses, hollow frame mattresses and water beds. e hardboard

maintains a constant pressure on the Sensor Pad, enabling it to detect the

baby’s movements even when the baby is at the edges of the crib.

• e sensor pad is made of plastic and does not permit the air to

circulate. erefore, mildew build up could develop underneath the mattress

in the sensor pad area. We suggest rotating the mattress regularly to prevent

any mildew.

37. False alarms may happen for several reasons:

• Camera Unit has not been turned OFF after you have removed your baby

from the crib.

• Sensor Pad has not been placed under the mattress properly. Be sure the

Sensor Pad is on a ﬂat, ﬁrm surface with the printed side facing up.

• e sensitivity level may also need to be adjusted. Refer to User’s Guide.

Always be sure to immediately check on baby whenever an alarm sounds.

WARNINGS

38. Modiﬁcations not authorized by the manufacturer may void users authority

to operate this device.

38.1 NOTE: is equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits

are designed to provide reasonable protection against harmful interference

in a residential installation. is equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

38.2 However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment

OFF and ON, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

diﬀerent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

38.3 is device complies with the part 15 of the FCC Rules and the Industry

Canada license - exempt RSS standards(s). Operation is subject to the

following two conditions:

(1) is device may not cause harmful interference, and

(2) is device must accept any interference received, including interference

that may cause undesired operation.

IC Warning :

39. is device complies with industry Canada RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including inferences that may

cause undesired operation of the device.

39.1 Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC AND IC REGULATIONS

RF radiation exposure statement

e Nursery Unit complies with FCC RF radiation exposure limits set

forth for an uncontrolled environment.

Caution: To maintain the compliance with the FCC’s and Industry

Canada’s RF exposure guideline, install the Nursery Unit at least 7.9”

(20 cm) from ALL persons. e transmitter of this device must not

be co-located or operating in conjunction with any other antenna

or transmitter.

Industry Canada

is product meets the applicable Industry Canada technical

speciﬁcations.

CAN ICES-3 (B)/NMB-3 (B)

247AC_Manuel_AC315_NA_m3.indd 3 18-03-02 16:10

Im Menü komme ich nicht weiter als zum Symbol der Geräteverbindung. Kann nur mit dem Pfeiltasten gerät 1-4 auswählen und kann das nicht mit Ok bestätigen? Eingereicht am 23-10-2019 14:50
Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Angelcare AC315 wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Andere Handbücher von Angelcare AC315

Angelcare AC315 Kurzanleitung - Englisch - 14 seiten

Angelcare AC315 Bedienungsanleitung - Englisch - 30 seiten

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Angelcare AC315 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.