Bedienungsanleitung Angelcare AC420D (Seite 12 von 32) (Deutsch, Englisch, Holländisch, Français)

681637

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Der Schutzengel im

Kinderzimmer

AC420D

ICONS ON YOUR ANGELCARE

MONITOR

ICON MEANING FUNCTION AND USE

PARENTS UNIT

Power Press and hold to turn ON or OFF.

Channel key (8 channels) Press to enter or exit the Channel Selection Mode.

Pushthechannelbuttonontheparentsunit.The“‑‑”symbolwillappearalong

with the In Range icon which will flash. Press the channel selector (top button)

on the nursery unit until the night light halo fashes. Select the channel by gently

pushing on the top button on the nursery unit (you will see the channel

changing on the parents unit). Once the channel is selected, press and hold the

nursery unit top button to confirm selection (halo will stop flashing).

Both units are always on the same channel.

If the interference persists, consult the Troubleshooting section.

Temporary mute key Press to mute the speaker. parents unit will not receive sound for 2 minutes.

Press again to reactivate the sound before the 2 minutes are up, if desired.

Up and down

sound volume

Increases or decreases volume on the parents unit

PARENTS UNIT’S SCREEN DISPLAY

Nursery unit

When this icon appear, batteries need to be replaced in the nursery unit.

Parents unit This icon will be ON only during Channel Selection Mode.

Sound This icon indicates that the sound transmission is activated. It will flash when

in Temporary Mute Mode.

Battery level When this icon is clear, the batteries in the parents unit are low, and the parents

unit needs to be placed on the charger. When icon is clear and flashes, and the

nursery unit icon appears, the nursery unit batteries needs to be replaced. When the

batteriesareTOOLOW,a“beep”willbeheardevery15seconds.Thelowbattery

warning will continue for 30 minutes before the unit shuts itself OFF.

Sound level indicator Displays the sound level on the parents unit. There are 5 sound levels. Once you've

chosen the desired level with the Up and Down keys, the bars will disappear and will

start moving according to the sound transmitted by the nursery unit. The sound level

indicator bars allow you to see the level of sound in your baby’s room. The louder

the sounds from baby, the more bars appear.

Channel and Baby’s room

temperature display

When turning ON the parents unit then the nursery unit, the channel number

will be displayed on the parents unit screen for about one minute. It will then be

replaced by the nursery room temperature display (in Celsius).

Note: If the nursery unit is ON before the parents unit, or if the Parent Unit is

OFF and then turned ON while nursery unit is ON, the temperature display will

indicate the channel number until there is a change of temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Angelcare AC420D Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info