Bedienungsanleitung Angelcare AC605-2P (Seite 10 von 35) (Englisch, Französisch, Spanisch)

681993

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERIES

• Ensure that you fully charge your batteries for 15 hours before their first use.

• To maintain maximum battery life it is recommended that you fully discharge

your batteries periodically. Battery performance can be diminished by leaving

the batteries constantly charging. If your Parent Unit is not in use, please turn it OFF.

• Inadequate battery power can impair the performance of your monitor. If you are not

happy with the performance of your Parent Unit/Monitor please replace the

rechargeable batteries (3 or 6 x NiMH Rechargeable Batteries).

• It is advisable to change the batteries every 6 months

FALSE ALARMS

• Verify the connection between the Sensor Pad and the Nursery Unit.

Unplug and reconnect the cord.

• Make sure there is no bedding between the mattress and the Sensor Pad.

• If the crib has a spring or slat base, place a hardboard between the crib base and the

Sensor Pad measuring at least 13” x 13” (33 x 33 cm) and 1/4’’ (6 mm) thick.

• Make sure the Sensor Pad is positioned as described under the setup requirements.

Sensitivity may need to be adjusted, refer to Step 5.1.

ALARM WILL NOT SOUND

• Avoid contact with the crib when the monitor is ON.

• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement

from outside the crib.

• Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.

• You may need to decrease the sensitivity, refer to Step 5.1.

NO SOUND IS BEING TRANSMITTED

• Ensure that both units are switched ON.

• Check that the sound has not been turned down on the Parent Unit. Increase the

volume level on the Parent Unit, refer to Step 5.3.

• If there is no power to any unit check/replace the batteries, recharge the Parent Unit and

check the AC Adaptors are working. Change electrical outlets if required.

• Bring the Parent Unit and the Nursery Unit closer together.

POWER INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP

• Check/replace batteries or recharge the Parent Unit.

• Check connections or change to another electrical outlet.

• Ensure both units are on the same channel, either A, B or C.

WEAK RECEPTION

• Bring units closer together.

• Change the position of one or both units.

• Place units on a flat surface away from baby’s reach.

• Replace the batteries or recharge the Parent Unit.

STATIC, DISTORSIONS, INTERFERENCES

(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC…)

• Rotate the Parent Unit or move it away from source of interference.

• Check/replace batteries or recharge Parent Unit.

FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)

• Move the units farther apart (at least 3 meters/10 feet apart).

• Decrease volume on the Parent Unit.

LIMITED WARRANTY

Angelcare

warrants to the original owner of this product that Angelcare

, movement and

sound monitor (model AC605-2PU) is free from any material and workmanship defects, for

a period of one (1) year (rechargeable batteries not included) from the date of the original

purchase. If this monitoring system fails to function properly when used as directed under

normal conditions within the one year period, Angelcare

will either repair or replace the

product, at our discretion, free of charge. Please contact your distributor.

The product must be accompanied by a proof of purchase, either a bill of sale or other

proof that the monitoring system is within the warranty period. Angelcare

will bear the

cost of repairing or replacing the product and shipping it back to you.

This warranty does not apply to a product which has been damaged as a result of

improper maintenance, an accident, improper voltage supply or any other form of

misuse. The warranty is also void if the owner repairs or modifies the product in any

way. Angelcare

is not liable for any incidental or consequential damages with regard

to this product. The warranty also excludes any liability other than what is stated above.

No other warranty is given.

This warranty does not cover products and accessories which are not Angelcare-branded,

or any problems that result from usage that is not in accordance with product instructions,

failure to follow the product instructions, or problems caused by using accessories, parts or

components not supplied by Angelcare.

LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO

THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM

THE USE OF THIS PRODUCT.

IMPORTANT!

This Angelcare

monitor is a personal care product. Please do not return this product

to the store. If you have questions or need help, please call your distributor before

returning this product.

If you experience a problem that is not noted in this manual,

please do not return the product to the store. If you are not completely

satisfied or have any questions:

United States and Canada: please contact us at: angelcare@cdecinc.ca

Other countries: please contact your local distributor.

We may have a simple solution to your problem.

monitor and other

Angelcare

products on our website:

www.angelcarebaby.com

ANGELCARE MONITORS INC.

9975, avenue De Catania, Local B

Brossard, Québec, Canada

J4Z 3V6

Angelcare AC605-2P Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info