Bedienungsanleitung AngelEye CO-FA-AE-9B (Seite 11 von 20) (Englisch)

764158

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

mode (It may take up to two

minutes of exposure to the

smoke for the localised level

of carbon monoxide within the

sensor to reach over 50ppm).

Now move the source of CO

away from the alarm as the

test is ﬁnished.

Step 5 After step 4, put out the

incense stick by placing it

into a dish of water. Ensure

that all ﬂames have been

extinguished.

NOTE: If the localised carbon monoxide

level within the sensor does not reach

50ppm during the test, the sensor test will

stop automatically after 3 minutes.

ALARM TEST

Test the sounder, power pack and

circuitry by pressing and releasing the

Test / button to conﬁrm that the alarm

is operating properly. The alarm should

sound as soon as the Test button is

pressed, and the Alarm LED will illuminate

red indicating that the sounder is working

and the power pack is providing power to

the unit. This test should be performed on

a weekly basis.

UNDERSTANDING

THE PRODUCT’S

INDICATORS

The higher the concentration of carbon

monoxide detected by the alarm, the

quicker it will respond. When sufﬁcient

carbon monoxide is detected a loud

audible signal (85 dB at 1m/3 feet) will be

emitted and the Alarm LED will ﬂash red

once every second.

The Alarm will sound:

• Between 60 and 90 minutes when

exposed to 50ppm of CO.

• Between 10 and 40 minutes when

exposed to 100ppm of CO.

• Within 3 minutes when exposed to

300ppm or more.

Fault:

The unit continuously checks the settings

of its sensor and circuitry. If any of these

settings are found to be incorrect or if

the batteries become low then the alarm

will emit a single audible chirp once per

minute for up to 30 days. IMPORTANT:

This does NOT mean that the alarm has

detected carbon monoxide.

Replace batteries immediately. If the

product continues to chirp despite having

new batteries and the product is still

within warranty then contact technical

support for advice. If the product is no

longer in warranty replace it immediately!

WHAT TO DO IN THE

EVENT OF AN ALARM

WARNING: A loud alarm is a warning

that unusually high and potentially lethal

levels of carbon monoxide are present.

Never ignore this alarm, further exposure

can be fatal. Immediately check residents

for symptoms of carbon monoxide

poisoning, and contact the proper

authorities to resolve all CO problems.

NEVER IGNORE ANY ALARM.

Please carefully review this owner’s

manual to ensure that you know what

actions to take in the event of an alarm.

What to do during an alarm:

• Keep calm and open the doors and

windows to ventilate the property.

• Stop using all fuel burning appliances

and ensure, if possible, that they are

turned off.

• Evacuate the property leaving the

doors and windows open.

• Ring your gas or other fuel supplier

on their emergency number; keep the

number in a prominent place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AngelEye CO-FA-AE-9B Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info