Bedienungsanleitung Anker N600 (Seite 8 von 12) (Englisch)

706166

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Enable:

Select this to enable the current bandwidth entry.

IP Range:

Enter a single IP address into the first blank or an IP address range

into both. You can click

Network

DHCP

Client List

to find your PC's IP

address.

Upstream Bandwidth Limit:

Maximum total upload bandwidth for a specified

PC or range of PCs.

Downstream Bandwidth Limit:

Maximum total download bandwidth for a

specified PC or range of PCs.

P2P:

Peer-to-peer, a computer or networking distributed application

architecture that partitions tasks or workloads among peers. At times, the P2P

application will occupy a large bandwidth.

P2P Download Control:

Regulates the P2P download rate to ensure each user

a guaranteed share of bandwidth.

Allocation Mode:

Select either "Individual (Each member of the IP range shall

utilize the allocated bandwidth individually)" or "Collective (All members of the

IP range shall share the allocated bandwidth collectively)".

Allocation Policy:

Select either "Utilize only the allocated bandwidth" or

"Utilize more bandwidth if available". If you select "Utilize more bandwidth if

available", the router will dynamically adjust the uplink/downlink bandwidth

allocation to ensure the defined and additional bandwidth (if available).

Normally, the Port Filter is rarely used – except by those who understand what Port

is – while the URL and MAC Filters are easier and thus more commonly-used.

You can prevent LAN PCs or other network devices from accessing certain ports on

the Internet using the Port Filter functionality.

9.1 Port Filter

9. Filter Functions (Port Filter、URL Filter、MAC Filter)

Step 1: Adjust the Time & Date.

Click

Tool

Time & Date

Copy Local Time

Save

, and the time of the

Anker router will be the same as your PCs.

Note: If your router’s power is turned off, then the time will be reverted to the

default setting. You may need to copy the local time again

Step 2: Assign a static IP Address to your PC.

To use this function, you need to assign a static IP Address to your PC.

Click

Network

DHCP

Static Assignment

, input the IP Address you want to

assign as well as your PC's MAC Address, then click

Add

Save

. You will need

to reboot your PCs as well as any other network devices to obtain the assigned

IP Address. You can reboot them once you have finished setting up the router.

Note 1:

If you don't know your PC's MAC and/or IP Address, click

Network

DHCP

Client List

to find them.

Note 2:

The IP Address should be 192.168.0.XXX (XXX: any number between

100-200), and cannot be the same as that of any other network device

connected to the router.

Step 3: Dividing Users into Groups.

This feature allows internal network users to be split into different user groups

according to their IP addresses. Using these groupings, network administrators

can more easily enforce web security and content policies via features such as

Port and URL filtering. This feature includes 2 submenus: User Group and Time

Group.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Anker N600 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Anker N600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info