Bedienungsanleitung ANT B-Twig 8 (Seite 4 von 59) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

801467

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

ENGLISH

B-TWIG 8 MOBILE | User manual

User manual | B-TWIG 8 MOBILE

life cycle. In order to preserve battery duration

and reliability over time, avoid battery complete

discharge during operation.

13 STATUS

Press for 3 seconds this button to view the charge

status of the internal battery. Reporting occurs

when the system is off (OFF) or when the unit is

connected to the mains with the POWER switch

in the CHARGE position.

14 DIGITAL MATRIX CONTROLLER

LCD control interface and digital menu display; for

details see chapter 5 SYSTEM CONTROL.

15 SETUP/MAIN LEVEL

This rotary knob with integrated push button is the

primary controller of system digital functions. It

allows access to the control menu and adjustment

of the parameters selected according to the

connected devices or application preferences.

It also acts as a classic MAIN LEVEL knob for

adjusting the overall system output volume.

16 SIG/CLIP

Two-color output level indicator

Green LED: the signal is present

Red LED: the signal is very strong and is close

to distortion.

If the red LED lights up continuously, it is necessary

to reduce the MAIN LEVEL level or, otherwise,

adjust the levels/parameters of CH1, CH2, CH3.

7 STEREO AUX IN

Unbalanced input with 3.5mm mini-jack stereo socket.

Connect to this input the signal from an external device such

as Smartphone, Tablet or PC. It is possible to use this input

and the Bluetooth® signal at the same time, but for better

levels management, we do not recommend this option.

8 CHANNEL 3 LEVEL

This control adjusts channel 3 level. Turn the knob clockwise

to increase the volume or counterclockwise to decrease it.

9 LED PAIRING

Status LED for Bluetooth® connection:

- Flashing green light, synchronization and pairing with

the mobile device.

- Steady green light, audio streaming in progress.

To synchronize and connect mobile phones or tablets, refer

to chapter 5 SYSTEM CONTROL.

10 MAIN OUT CONNECTOR

Balanced XLR-M output for connection to another powered

system. The signal of this output depends on the levels of

the input channels. Using the APP menu the output can

be set as LINK OUT or MIX OUT.

11 BATTERY LEVEL

Internal battery status LEDs, in descending order

1st LED: steady green light, battery fully charged

2nd LED: steady green light, battery half charged

3rd LED: steady green light, battery one quarter charged

4th LED: steady red light, battery close to discharging,

recharge the battery as soon as possible.

12 CHARGE LED

While the internal battery is charging, this LED is lit.

When the battery is fully charged, the process stops

automatically and the CHARGE LED turns off.

In order to charge the battery, it is necessary to connect

the power cable to the wall socket and place the POWER

button in CHARGE mode. Battery total charge is achieved

in about 5 hours.

It is also possible to recharge the battery less effectively,

even during system operation connecting the unit to the

mains and moving the POWER button to ON position.

WARNING: Lithium-ion batteries, if fully discharged to zero,

can suffer irreparable damage that abruptly shortens their

12 13

7 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ANT B-Twig 8 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info