Bedienungsanleitung ANT MIM 30 (Seite 6 von 21) (Deutsch, Englisch, Italienisch)

801483

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGLISH

MiM Series | User manual

Series

User manual | MiM Series

press again ESC (MiM 30R) or SET (MiM 20R) to exit the menu.

Simultaneously using more systems, it’s better to have them on the same group

but on different channels.

If the transmitter is in Mono mode, using the up/down buttons you set the position

of the signal in the Stereo eld.

4 TONE SELECTION (MiM 30R only)

Press the SET button for 2 seconds to access the settings menu, then press again

SET until when “TONE” starts flashing in the display. Use the up and down buttons

to activate (ON) or deactivate (OFF) TONE feature.

TONE ON boosts high frequencies.

5 LIMITER SELECTION (MiM 30R only)

Press the SET button for 2 seconds to access the settings menu, then press again

SET until when “LIMITER” starts flashing in the display. Use the up and down buttons

to activate (ON) or deactivate (OFF) LIMITER feature. LIMITER ON reduces sudden

peaks, thus protecting your hearing.

6 LOCK (MiM 30R only)

Press the SET button for 2 seconds to access the settings menu, then press again

SET until when the lock icon starts flashing. Use the up and down buttons to activate

(ON) or deactivate (OFF) the lock.

ATTENTION: when LOCK icon is displayed, you can see the unit settings, which

are not editable.

7 MIX (MiM 30R only)

Press the SET button for 2 seconds to access the settings menu, then press again

SET until when “MIX” starts flashing in the display. Use the up and down buttons to

activate (ON) or deactivate (OFF) MIX feature.

MIX ON allows to listen both transmitter input signals - AF1 and AF2 - using the

supplied earphones.

To balance the signal between AF1 and AF2 inputs, press the up and down buttons.

You can choose among 31 available positions:

In MIX -0- position, AF1 and AF2 input signals are balanced.

Press the (button arrow up) to increase AF1 signal versus AF2 signal:

1-, 2-, 3-, 4-, 5-, 6-, 7-,8-, 9-, A-, b-, C-, d-, E-, and F- (max)

Press the (button arrow down) to increase AF2 signal versus AF1 signal:

-1, -2, -3, -4, -5, -6, -7, -8, -9, -A, -b, -C, -d, -E, and -F (max)

8 BATTERIES LEVEL INDICATOR

This icon displays in 4 steps the battery charge level. When inside the icon there’s no

bars present and LOW BATT LED flashes, please immediately replace the batteries.

4 | TROUBLESHOOTING

PROBLEM LEDS SOLUTION

No sound or very

low sound level.

Power LED

turned off.

Make sure the batteries are not discharged

and that the receiver is turned on.

Transmitter LCD turned off.

Check the connection between power

supply and the transmitter.

Turn on the transmitter.

Receiver RF indicator is off.

Make sure that transmitter and receiver are

set to the same frequency.

Reduce the distance between transmitter

and receiver, and verify that the two devices

are in direct visual contact.

Make sure that the transmitter antenna is

mounted correctly.

Receiver turned on

and RF light on.

Raise the volume of the receiver and check

earphones connection.

Check the input level of the transmitter and,

possibly, increase it.

Distortions or unwanted

interferences.

Receiver RF

antenna lit.

Increase the distance from possible causes

of interference (digital control devices, such

as CD player, console ...).

Use a different frequency.

Distorted sound.

Receiver LOW

BATT LED

flashes.

Too high level

indicator of the

transmitter.

Replace the batteries.

Turn down the volume control of the

transmitter or the volume of the source

device.

Listening to a Mono signal only

from one hearphones side.

Transmitter is

in Stereo

mode.

Set the transmitter in Mono mode.

Mode Stereo and MIX activated:

you want to hear only the right

input signal transmitter, even if

the transmitter is in Stereo mode

and both the transmitter inputs

are used. (MiM 30 only).

Transmitter is

in Mono mode. Set the transmitter in Stereo mode.

Listening to two independent

mono signals in left and right

earphones, but you want to hear

the signals in both earphones

(MiM 30 only).

Activate MIX in the transmitter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ANT MIM 30 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info