Bedienungsanleitung ANT Uno G8 (Seite 5 von 25) (Deutsch, Englisch, Italienisch)

801481

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

ENGLISH

UNO G8 Series | User manual

User manual | UNO G8 Series

Series

1 ANTENNA

It allows the transmission of the

signal.

2 MULTI-FUNCTION DISPLAY

This LCD features a number of

controls and indicators, such as the

group and channel number, icons of

MUTE and lock, and the 4-segment

battery status indicator.

NOTE: the backlight automatically

turns off after a short while.

3 ON/OFF - MUTE

Press this button for 2” to turn on or

off the beltpack transmitter.

Press it briefly to turn ON/OFF the

MUTE function.

4 ASC/LOW BATT

Green LED steadily lit: transmitter on.

Green LED flashing: channel synchronization, ASC in progress.

Red LED steadily lit: MUTE function activated.

Red LED flashing: low battery.

5 IR WINDOW

It allows the synchronization of the channel (frequency) with the receiver.

After pressing the receiver ASC button, place the bottom of the beltpack transmitter

close to the IR window of UNO G8R receiver and wait for the selected channel to stop

flashing on the handheld display. After few moments the synchronization process

ends, and the RF signal level indicator will show the presence of signal.

6 SELECT

Press this button to select functions, and to set receiver parameters values.

7 BATTERIES COMPARTMENT

To replace the batteries, lightly press on the sides of the cover and lift forward.

Take out the old batteries, and insert two new batteries (respecting the compartment

icons) then close the lid. Remove the batteries from the receiver when not in use for

extended periods.

3 | SYSTEM SETUP

To achieve the best reception, please place the receiver at least 1 m

high and put the antennas vertically upwards. Avoid placing the receiver

close to metal objects or digital control devices (CD players, computers,

console, and so on). The receiver and transmitter must have a direct

“visual contact”.

3.1 | RECEIVER SETUP

LCD main window shows indicators of audio (AF) and radio-reception

(RF) levels, followed by the indicators of Squelch (SQL), VOLUME, GROUP,

CHANNEL, ANTENNA DIVERSITY, SYNC and the lock icon, when it’s active

To proceed with the adjustments, please use SET and up/down buttons.

GROUP SELECTION

• Press the SET button until when “GROUP” appears in the display. Use the

up and down buttons to select the desired group of frequency, then press

again SET to scroll following parameters and to conrm the choice.

2.3 | BELTPACK TRANSMITTER - UNO G8B

12 63 98 41

8 MINI XLR-M INPUT

Connect to this input the provided HS-03 headset or the signal from

other sound sources.

9 GAIN SELECTOR

There are three different gain settings:

Mic: for supplied headset microphone and other microphones

0 dB: low output level instruments

-10dB: high output level instruments

WEARING THE BELTPACK

RECEIVER:

Clip the receiver to a belt or to

the shoulder strap of your guitar.

For better fastening reliability it’s

preferable to secure it as shown

in the gure, then fasten it in a

way that the belt is tight from

the clip.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ANT Uno G8 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info