Bedienungsanleitung Apa 16626 - HB-1204 ES (Seite 7 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

807543

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Place the mains cable in such a manner that it

does not impede and that it cannot be unplug-

ged accidentally.

• Disconnect the battery charger from the power

supply after the charging process.

• Keep the charger in a place that cannot be

accessed by children or unauthorised persons.

• Never operate the device in the vicinity of am-

mable materials or in an environment prone to

explosion.

• Always wear suitable working clothes, protec-

tive gloves and goggles. Battery acid is corrosi-

ve! Immediately and thoroughly wash o any

splashed acid and consult a doctor, if necessary.

If battery acid gets into the eyes, immediately

rinse under running water for at least 10 minu-

tes and consult a doctor.

• Do not cover the charger, this may lead to

overheating and result in damages. Never set

the charger up for operation on a surface that

is insulating (e.g. polystyrene). There is a risk of

heat built up!

• If you wish to charge a vehicle battery in the

installed state, rst park the vehicle safely,

put on the parking break and switch o the

ignition. Cut the battery o from the on-board

network of your vehicle. To do this, consult the

manual for your vehicle, or ask your specialist

workshop.

• This charger enables you to charge a battery

without needing to disconnect it from the on-

board network. If you wish to make use of this

option, make sure that your vehicle will not be

damaged by this process. For this purpose, read

the manual of your vehicle or ask your specia-

list workshop.

• To remove the battery charger, rst pull the

plug out of the socket and observe the sequen-

ce for disconnection. This prevents sparks from

forming. Since charging generates a detona-

ting gas, this is particularly important for the

sake of your safety.

• Only hold the power cable at the power plug

when disconnecting from the power socket.

• Never expose the charger to the vicinity of re,

heat and extensive temperatures over +40°C.

• Store these instructions carefully and, if

necessary, pass them on to other users.

5. EXPLANATION OF SYMBOLS

Fuse, here:

Slow-burning, 1.6 A

Recommended

battery capacity

Read the operating instructions

Complies with EC directives

Labelled electrical products may not be disposed

of in the household waste

Devices with this symbol may only be operated in

the house (dry environment)

Insulated housing (protection class II).

Figure 1: View of front

1 Carry handle

2 Control lamp – Green - Fully charged

3 Control lamp – Yellow - Charging

4 Control lamp – Green - Operating

5 Control lamp – Red - Pole callipers connected incorrectly

6.1 OVERVIEW

6. OPERATING INSTRUCTIONS

Before using the device make sure that you have

read the operating instructions for the battery

and the vehicle and you have understood all of

the safety precautions.

Figure 2: View of rear

1 Carry handle

6 Mounts for cable holder

7 Type plate

8 Mains connection cable

9 Charging cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Apa 16626 - HB-1204 ES Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info